Reviewer Board
Members of the reviewer board are selected from all Metals reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
Technological Department, Catholic University of Ávila, 05005 Avila, Spain
Interests: technology-enhanced learning; virtual learning environments; virtual reality; augmented reality; metallography; material characterization; mechanical properties; mechanical behavior of materials; mechanical testing; materials testing; stress and strain analysis; fracture mechanics; fractography; corrosion science; failure analysis; fatigue; finite element analysis
Interests: technology-enhanced learning; virtual learning environments; virtual reality; augmented reality; metallography; material characterization; mechanical properties; mechanical behavior of materials; mechanical testing; materials testing; stress and strain analysis; fracture mechanics; fractography; corrosion science; failure analysis; fatigue; finite element analysis
Department of Mechanical Engineering, Technical University of Denmark, 2800 Kongens Lyngby, Denmark
Interests: martensite; heat treatment of metals; cryogenic treatment; transformation kinetics in steel; materials characterization
Interests: martensite; heat treatment of metals; cryogenic treatment; transformation kinetics in steel; materials characterization
Advanced Manufacturing and Materials, Aalto University, Espoo, Finland
Interests: thermal fatigue; fatigue; residual stresses; nondestructive testing reliability; probability of detection; machine learning
Interests: thermal fatigue; fatigue; residual stresses; nondestructive testing reliability; probability of detection; machine learning
Process Metallurgy Research Unit, University of Oulu, P.O. Box 4300, 90014 Oulu, Finland
Interests: hot metal desulfurization; electric arc furnaces; converter metallurgy; ladle metallurgy; continuous casting; process modelling and simulation; kinetics and thermodynamics of metallurgical processes; refractory materials; inclusions; slags
Interests: hot metal desulfurization; electric arc furnaces; converter metallurgy; ladle metallurgy; continuous casting; process modelling and simulation; kinetics and thermodynamics of metallurgical processes; refractory materials; inclusions; slags
Laboratory of High Energetic and Special Materials, National Research Tomsk State University, Lenin Av. 36, 634050 Tomsk, Russia
Interests: high-energy materials; high-strength light alloys; metal matrix nanocomposites
Interests: high-energy materials; high-strength light alloys; metal matrix nanocomposites
Military University of Technology, Faculty of Mechanical Engineering, Gen. W. Urbanowicza 2 Street, 00-908 Warsaw, Poland
Interests: explosive welding; friction stir welding; Microstructure; microscopy; mechanical properties; metals
Interests: explosive welding; friction stir welding; Microstructure; microscopy; mechanical properties; metals
School of Materials Science and Engineering, Harbin Institute of Technology at Weihai, Weihai 264209, China
Interests: materials science; metal forming; mechanical behavior of metallic materials; friction; layered materials; plastic deformation; micro-forming; size effects; flexible forming; formability; constitutive modeling; metallurgy; accumulative roll bonding
Interests: materials science; metal forming; mechanical behavior of metallic materials; friction; layered materials; plastic deformation; micro-forming; size effects; flexible forming; formability; constitutive modeling; metallurgy; accumulative roll bonding
National Engineering Research Center of Light Alloy Net Forming, Shanghai Jiao Tong University, Shanghai 200240, China
Interests: Al alloys; Mg alloys; ferrous alloys; metal matrix composites; casting; materials characterization; metal liquid corrosion; high temperature oxidation; grain refinement; mechanical behavior of materials
Interests: Al alloys; Mg alloys; ferrous alloys; metal matrix composites; casting; materials characterization; metal liquid corrosion; high temperature oxidation; grain refinement; mechanical behavior of materials
School of Materials Science and Engineering, Southeast University, Jiangsu 211189, Nanjing, China
Interests: electrochemical catalytic properties of amorphous alloys/ high-entropy alloys; mechanical properties of ferromagnetic bulk metallic glasses; mechanical properties of refractory high-entropy alloys
Interests: electrochemical catalytic properties of amorphous alloys/ high-entropy alloys; mechanical properties of ferromagnetic bulk metallic glasses; mechanical properties of refractory high-entropy alloys
Department of Applied Engineering, Jacksonville State University, Jacksonville, AL 36265, USA
Interests: advanced manufacturing; additive manufacturing; design for manufacturing; materials
Interests: advanced manufacturing; additive manufacturing; design for manufacturing; materials
School of Mechanical and Power Engineering, Nanjing Tech University, 211816 Nanjing, China
Interests: high-temperature material; cyclic constitutive model; Creep; fatigue at high temperature; crystal plasticity finite element method; Selective Laser Melting
Interests: high-temperature material; cyclic constitutive model; Creep; fatigue at high temperature; crystal plasticity finite element method; Selective Laser Melting
School of Materials Science and Engineering, Guilin University of Electronic Technology, Guilin 541004, China
Interests: hydrogen storage materials; biomass adsorption materials; electrochemistry; material characterization
Interests: hydrogen storage materials; biomass adsorption materials; electrochemistry; material characterization
Plasma Science and Fusion Center (PSFC), Massachusetts Institute of Technology (MIT), Cambridge, MA 02139, USA
Interests: advanced metallic materials; alloy design (high-entropy alloys; low-activation alloys); metal matrix composites; high-entropy alloys; heavy alloys; development and fabrication (powder metallurgy; additive manufacturing); nanoscale characterization (electron microscopy; nanoindentation); refractory alloys; post-irradiation examination (PIE); metal-matrix composites; plasma-material interaction; powder metallurgy; fabrication; nano-scale characterization; process-structure-property relationships of complex metallic materials; electron microscopy; X-ray and electron diffraction; mechanical properties; oxidation resistance; post-irradiation examination; plasma-materials interaction (PMI); fusion plasma-facing materials
Interests: advanced metallic materials; alloy design (high-entropy alloys; low-activation alloys); metal matrix composites; high-entropy alloys; heavy alloys; development and fabrication (powder metallurgy; additive manufacturing); nanoscale characterization (electron microscopy; nanoindentation); refractory alloys; post-irradiation examination (PIE); metal-matrix composites; plasma-material interaction; powder metallurgy; fabrication; nano-scale characterization; process-structure-property relationships of complex metallic materials; electron microscopy; X-ray and electron diffraction; mechanical properties; oxidation resistance; post-irradiation examination; plasma-materials interaction (PMI); fusion plasma-facing materials
School of Materials Science and Engineering, Tongji University, Shanghai 201804, China
Interests: bulk metallic glass; amorphous alloy coating; thin film materials; immiscible alloy
Interests: bulk metallic glass; amorphous alloy coating; thin film materials; immiscible alloy
Faculty of Metallurgy and Energy Engineering, Kunming University of Science and Technology, Kunming, China
Interests: low-carbon technology in metallurgical process; comprehensive utilization of secondary resources; chemical looping technology
Interests: low-carbon technology in metallurgical process; comprehensive utilization of secondary resources; chemical looping technology
Institute of Iron and Steel Technology, TU Bergakademie Freiberg, 09599 Freiberg, Germany
Interests: mechanical properties; material characterization; materials engineering; microstructure; casting; heat treatment; plasticity; materials processing; mechanical behavior of materials; metals; steels
Interests: mechanical properties; material characterization; materials engineering; microstructure; casting; heat treatment; plasticity; materials processing; mechanical behavior of materials; metals; steels
Empa, Laboratory of Mechanics of Materials and Nanostructures, Swiss Federal Laboratories for Materials Science and Technology, Feuerwerkerstrasse 39, CH-3602 Thun, Switzerland
Interests: high-throughput materials science; metallurgical alloy design; steels; hardfacing alloys; complex concentrated alloys; welding; metallurgy; materials processing
Interests: high-throughput materials science; metallurgical alloy design; steels; hardfacing alloys; complex concentrated alloys; welding; metallurgy; materials processing
Department Functional Magnesium Materials, Institut of Metallic Biomaterials, Helmholtz-Zentrum hereon GmbH
Max-Planck-Straße 1
21502 Geesthacht, Germany
Tel.: +49 (0)41 52 87-0
Fax: +49 (0)41 52 87-1403
Interests: Mg alloys; material characterization; mechanical properties; mechanical behavior of materials; X-ray diffraction; microstructure; material characteristics; materials processing; advanced materials; heat treatment; sintering; casting; solidification
Interests: Mg alloys; material characterization; mechanical properties; mechanical behavior of materials; X-ray diffraction; microstructure; material characteristics; materials processing; advanced materials; heat treatment; sintering; casting; solidification
AGH University of Science and Technology
al. Mickiewicza 30, 30-059 Kraków , Poland
Interests: metals; surface engineering; nanomaterials; extrusion technology; heat treatment; management; risks
Interests: metals; surface engineering; nanomaterials; extrusion technology; heat treatment; management; risks
Department of Technology and Automation, Czestochowa University of Technology, al. Armii Krajowej 19 C, 42 -201 Czestochowa, Poland
Interests: material characterization; materials mechanical properties; finite element analysis; structural analysis; mechanical behavior of materials; microstructure; finite element modeling; mechanical testing mechanics of materials
Interests: material characterization; materials mechanical properties; finite element analysis; structural analysis; mechanical behavior of materials; microstructure; finite element modeling; mechanical testing mechanics of materials
Institute of Mechanical Engineering, Warsaw University of Life Sciences, 02-787 Warsaw, Poland
Interests: friction welding; welding; microstructure; metals; ductile irons; aluminium alloys; magnesium alloys; tungsten alloys; mechanical properties; optimization; modeling; neural networks; genetic algorithm; microhardness; tensile strength
Interests: friction welding; welding; microstructure; metals; ductile irons; aluminium alloys; magnesium alloys; tungsten alloys; mechanical properties; optimization; modeling; neural networks; genetic algorithm; microhardness; tensile strength
Russ College of Engineering, Department of Mechanical Engineering, Ohio University, Athens, OH 45701, USA
Interests: acoustic emission; digital image correlation; micro-structure; material behavior; Mechanical Testing; experimental mechanics
Interests: acoustic emission; digital image correlation; micro-structure; material behavior; Mechanical Testing; experimental mechanics
Institute of Advanced Energy Technologies, Faculty of Infrastructure and Environment, Czestochowa University of Technology, Czestochowa, Poland
Interests: materials in energy; corrosion and degradation of materials; production of protective coatings; Hydrogen technologies; nanomaterials in energy and environmental engineering
Interests: materials in energy; corrosion and degradation of materials; production of protective coatings; Hydrogen technologies; nanomaterials in energy and environmental engineering
Silesian University of Technology,
Department of Foundry Engineering,
Towarowa 7, 44-100 Gliwice, Poland
Interests: layered castings; continuous casting; heat treatment; inoculation of metals and alloys; electromagnetic stirring; stainless cast steel; cast iron; pure aluminum; al alloys
Interests: layered castings; continuous casting; heat treatment; inoculation of metals and alloys; electromagnetic stirring; stainless cast steel; cast iron; pure aluminum; al alloys
State Key Laboratory of Advanced Special Steel, Shanghai University, Shanghai 200444, China
Interests: selective oxidation of steel; galvanizing; material design; mg alloy processing
Interests: selective oxidation of steel; galvanizing; material design; mg alloy processing
Department of Materials Engineering, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo 113-8656, Japan
Interests: metallic corrosion; NDT; electrochemical measurement; acoustic emission; pitting corrosion; stress corrosion cracking; steel; Mg alloy; Al alloy
Interests: metallic corrosion; NDT; electrochemical measurement; acoustic emission; pitting corrosion; stress corrosion cracking; steel; Mg alloy; Al alloy
Structures and Materials Performance Laboratory, Aerospace Research Center, National Research Council Canada, Ottawa, ON K1A 0R6, Canada
Interests: thermomechanical fatigue; fatigue-creep; Constitutive Modeling; life prediction
Interests: thermomechanical fatigue; fatigue-creep; Constitutive Modeling; life prediction
1. Micron School of Materials Science and Engineering, Boise State University, Boise, ID 83725, USA
2. Center for Advanced Energy Studies, Idaho Falls, ID 83401, USA
Interests: nuclear materials; magnetic materials; nanomaterials; transmission electron microscopy; atom probe tomography; microstructure characterization
2. Center for Advanced Energy Studies, Idaho Falls, ID 83401, USA
Interests: nuclear materials; magnetic materials; nanomaterials; transmission electron microscopy; atom probe tomography; microstructure characterization
School of Aerospace Engineering, Xiamen University, Xiamen 361005, China
Interests: density functional theory; material science; Ab initio thermodynamics; alloying design; physical metallurgy; lattice dynamics; mechanical properties; high-temperature alloys; high-entropy alloys; disorder materials
Interests: density functional theory; material science; Ab initio thermodynamics; alloying design; physical metallurgy; lattice dynamics; mechanical properties; high-temperature alloys; high-entropy alloys; disorder materials
School of Metallurgucal and Ecological Engineering, University of Science and Technology, Beijing, China
Interests: aluminum and its alloys; electrochemical processing of metals; energy metals
Interests: aluminum and its alloys; electrochemical processing of metals; energy metals
