2 June 2022
Materials | Top 10 Cited Papers in 2021 in the Section “Porous Materials”
You are accessing a machine-readable page. In order to be human-readable, please install an RSS reader.
All articles published by MDPI are made immediately available worldwide under an open access license. No special permission is required to reuse all or part of the article published by MDPI, including figures and tables. For articles published under an open access Creative Common CC BY license, any part of the article may be reused without permission provided that the original article is clearly cited. For more information, please refer to https://www.mdpi.com/openaccess.
Feature papers represent the most advanced research with significant potential for high impact in the field. A Feature Paper should be a substantial original Article that involves several techniques or approaches, provides an outlook for future research directions and describes possible research applications.
Feature papers are submitted upon individual invitation or recommendation by the scientific editors and must receive positive feedback from the reviewers.
Editor’s Choice articles are based on recommendations by the scientific editors of MDPI journals from around the world. Editors select a small number of articles recently published in the journal that they believe will be particularly interesting to readers, or important in the respective research area. The aim is to provide a snapshot of some of the most exciting work published in the various research areas of the journal.
Original Submission Date Received: .
The following are the 2021 top 10 cited papers from the Section “Porous Materials” of Materials (ISSN: 1996-1944):
1. “Idealized 3D Auxetic Mechanical Metamaterial: An Analytical, Numerical, and Experimental Study”
Ghavidelnia, N.; Bodaghi, M.; Hedayati, R.
Materials 2021, 14(4), 993. https://doi.org/10.3390/ma14040993
Full text available online: https://www.mdpi.com/1996-1944/14/4/993
2. “Polyurethane Foams for Domestic Sewage Treatment”
Dacewicz, E.; Grzybowska-Pietras, J.
Materials 2021, 14(4), 933. https://doi.org/10.3390/ma14040933
Full text available online: https://www.mdpi.com/1996-1944/14/4/933
3. “Porous Alumina Films Fabricated by Reduced Temperature Sulfuric Acid Anodizing: Morphology, Composition and Volumetric Growth”
Poznyak, A.; Pligovka, A.; Laryn, T.; Salerno, M.
Materials 2021, 14(4), 767. https://doi.org/10.3390/ma14040767
Full text available online: https://www.mdpi.com/1996-1944/14/4/767
4. “Adsorptive Removal of Phosphate from Aqueous Solutions Using Low-Cost Volcanic Rocks: Kinetics and Equilibrium Approaches”
Mekonnen, D.T.; Alemayehu, E.; Lennartz, B.
Materials 2021, 14(5), 1312. https://doi.org/10.3390/ma14051312
Full text available online: https://www.mdpi.com/1996-1944/14/5/1312
5. “Nitrogen-Doped Hierarchical Porous Activated Carbon Derived from Paddy for High-Performance Supercapacitors”
Yuan, Y.; Sun, Y.; Feng, Z.; Li, X.; Yi, R.; Sun, W.; Zhao, C.; Yang, L.
Materials 2021, 14(2), 318. https://doi.org/10.3390/ma14020318
Full text available online: https://www.mdpi.com/1996-1944/14/2/318
6. “Covalent Organic Frameworks: New Materials Platform for Photocatalytic Degradation of Aqueous Pollutants”
Qian, Y.; Ma, D.
Materials 2021, 14(19), 5600. https://doi.org/10.3390/ma14195600
Full text available online: https://www.mdpi.com/1996-1944/14/19/5600
7. “Effects of Physical and Chemical Modification of Sunflower Cake on Polyurethane Composite Foam Properties”
Strąkowska, A.; Członka, S.; Kairytė, A.; Strzelec, K.
Materials 2021, 14(6), 1414. https://doi.org/10.3390/ma14061414
Full text available online: https://www.mdpi.com/1996-1944/14/6/1414
8. “Vegetable Fillers and Rapeseed Oil-Based Polyol as Natural Raw Materials for the Production of Rigid Polyurethane Foams”
Leszczyńska, M.; Malewska, E.; Ryszkowska, J.; Kurańska, M.; Gloc, M.; Leszczyński, M.K.; Prociak, A.
Materials 2021, 14(7), 1772. https://doi.org/10.3390/ma14071772
Full text available online: https://www.mdpi.com/1996-1944/14/7/1772
9. “Casein/Apricot Filler in the Production of Flame-Retardant Polyurethane Composites”
Członka, S.; Kairytė, A.; Miedzińska, K.; Strąkowska, A.
Materials 2021, 14(13), 3620. https://doi.org/10.3390/ma14133620
Full text available online: https://www.mdpi.com/1996-1944/14/13/3620
10. “Dynamic Performance of Laminated High-Damping and High-Stiffness Composite Structure Composed of Metal Rubber and Silicone Rubber”
Zheng, X.; Ren, Z.; Shen, L.; Zhang, B.; Bai, H.
Materials 2021, 14(1), 187. https://doi.org/10.3390/ma14010187
Full text available online: https://www.mdpi.com/1996-1944/14/1/187