Engineering Proceedings, Volume 20, Issue 1

Electrical treeing is a type of dielectric breakdown in solid insulation when exposed to high voltage. It usually occurs due to non-uniform electric field, or by the presence of foreign particle (impurities) where partial discharge begins. Nanofiller...

The restoration of power systems is emphasized in the modern electric power system (EPS) due to complex, interconnected networks, and natural catastrophic events. However, large-scale disruptions in the power system result in a partial or complete bl...

Locating a dynamic object in an industrial environment in real time has been a significant scientific problem. The precise localization and positioning of an object are achieved by Satellite communication, Wireless Fidelity (WiFi), Bluetooth technolo...

The term “Industry 4.0” refers to a new phase of the Industrial Revolution that emphasizes interconnection, automation, machine learning, and real-time data. Reading gas meters is not an easy job and walking to and from the meter can be i...

People have been fascinated with humanoid robots for over two decades. They are expected to assist and collaborate with humans in the future. However, due to the limitations and complications of bipedal humanoids’ walking mechanisms, this goal...

In the modern world, High Impedance (HI) Faults’ identification is challenging in renewable energy-based distribution networks (REBDNs) due to the low level of the fault current. In this paper, a new HI fault detection/classification strategy i...

Due to the increase in renewable energy resources the need for highly efficient power electronics converters at flexible operating conditions has increased. The newly introduced wide bandgap switches, such as Gallium Nitride (GaN) are more suitable m...

In electrical power systems, the popularity of the microgrid is significantly increasing because of its remarkable advantages. However, the microgrid often exhibits protection problems and seriously affects the reliability of power system. Hence, a p...

CNC machining is a high precision computer-controlled subtractive manufacturing technique. In this paper, motor selection for a custom-made, low-cost, multi-axis CNC machine is discussed. The paper also deals with mechanical assembly of the custom-ma...

In this paper, an energy management schedule is proposed for a renewable energy (RE)-based grid-connected electric vehicle (EV) charging system (commercial charging station). This energy management schedule was converted into an energy management alg...