Skip to Content
  • Proceeding Paper
  • Open Access

28 October 2026

9 Pages

Experimental Study of the Shear Behavior of Steel–GFRP Hybrid Reinforced Concrete Beams †

and
Department of Structural Engineering, Faculty of Civil Engineering, Budapest University of Technology and Economics, Műegyetem rkp. 3., H-1111 Budapest, Hungary
*
Author to whom correspondence should be addressed.
†
Presented at the 15th Central European Congress on Concrete Engineering (CCC2026), Vodice, Croatia, 5–7 October 2026.

Abstract

Steel–glass-fiber-reinforced polymer (GFRP) hybrid reinforced concrete (RC) beams combine the stiffness and ductility of steel bars with the strength and corrosion resistance of GFRP bars. If corrosion resistance is the aim, however, GFRP stirrups should be used, as stirrups are the most exposed reinforcement. This study therefore investigates the influence of GFRP stirrups on the performance of steel–GFRP hybrid RC beams through four different reinforcement layouts resulting in a total of 16 specimens. The results indicate that the lower axial stiffness and bond behavior of GFRP stirrups not only increase the shear crack width, but also increase global deformations as a result, while flexural capacity may decrease.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.