Skip to Content
You are currently on the new version of our website. Access the old version .
  • Proceeding Paper
  • Open Access

30 July 2026

8 Pages

Numerical Assessment of the Cyclic Response of Aluminium Beams Using OpenSees †

,
,
,
and
1
Department of Civil Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84043 Fiscano, Italy
2
Department of Engineering, Pegaso University, Centro Direzionale Isola F2, 80132 Napoli, Italy
3
Faculty of Engineering, University of Bristol, Queens Road, Bristol BS8 1QU, UK
*
Author to whom correspondence should be addressed.

Abstract

Aluminium alloys are increasingly adopted in structural engineering due to their favourable strength-to-weight ratio, durability against corrosion, and sustainability benefits. This paper examines the cyclic response of hollow section beams manufactured from 6082-T6 aluminium alloy through a combined numerical–experimental approach. Based on experimental results available in the literature concerning aluminium beams subjected to incremental cyclic bending, an efficient computational model is developed within the OpenSees framework to reproduce cyclic hardening and low-cycle fatigue. The modelling strategy integrates the Giuffrè–Menegotto–Pinto constitutive law with a fatigue material formulation. Model parameters are calibrated against experimental force–displacement responses and cumulative dissipated energy to ensure an accurate representation of observed behaviour. The numerical results show good agreement with experimental data, successfully reproducing both the global cyclic response and material degradation phenomena.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.