Skip to Content
  • Proceeding Paper
  • Open Access

30 July 2026

8 Pages

Identification of the Natural Frequencies of a MacPherson Suspension Using FFT, FRF, and Spectral Analysis †

,
and
1
Department of Transport and Aircraft Equipment and Technologies, Faculty of Mechanical Engineering, Technical University of Sofia, Plovdiv Branch, 4000 Plovdiv, Bulgaria
2
Center of Competence Smart Mechatronics, Eco- and Energy Saving Systems and Technologies, 4000 Plovdiv, Bulgaria
*
Author to whom correspondence should be addressed.
†
Presented at the 15th International Scientific Conference TechSys 2026—Engineering, Technologies and Systems, Plovdiv, Bulgaria, 14–16 May 2026.

Abstract

This paper presents the results of identification of the natural frequencies of a MacPherson suspension using fast Fourier transform (FFT) analysis, frequency response function (FRF) analysis, and spectral analysis. Experimental investigations are conducted to determine the accelerations of a quarter-car MacPherson suspension system of an Audi A3 passenger car at a tire inflation pressure of 0.22 MPa. The investigated suspension control arm was equipped with one original equipment manufacturer (OEM) bushing and one polyurethane bushing. The paper also presents the results obtained using a set of MATLAB scripts developed for processing the vibration measurement data acquired from the components of the vehicle’s quarter-car suspension system, with each script corresponding to a specific analysis approach. The developed scripts implement several methods for analyzing the recorded acceleration signals, including FFT, FRF, and spectral analysis. The results obtained by applying these three methods to the experimental data are compared and discussed.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.