Abstract
Direct air-to-underwater communication is constrained by differences between the two media, coupling at the interface, and variable sea conditions. Laser-induced acoustics offers a non-contact transmission path by converting information carried by airborne laser pulses into underwater acoustic signals at the air–water interface or within the near-surface water layer. Following the signal path from optical transmission and interface coupling to acoustic generation, underwater propagation, and signal detection, this review examines link models and the mechanisms of thermal expansion, vaporization, and optical breakdown, together with propagation constraints, particle and bubble scattering, background noise, laser-parameter effects, and communication methods. The three generation mechanisms are compared in terms of source strength, repeatability, and modulation controllability. Experimental measurements, simulations, and theoretical estimates are distinguished when interpreting representative communication results. The reviewed evidence indicates that stronger acoustic output does not necessarily yield more reliable communication: the acoustic-response duration, effective bandwidth after propagation, and receiver configuration also constrain link performance. Research now encompasses modulation and receiver processing, system prototypes, and transmission through additional interfaces. Nevertheless, link stability under variable sea conditions, reproducible error-rate performance, and field validation remain insufficiently established. Further work should prioritize quantitative modeling and system-level assessment of optoacoustic conversion efficiency and end-to-end robustness under clearly defined application requirements.