Skip to Content
  • Article
  • Open Access

19 February 2025

24 Pages

Valorization of Biochar as a Reinforcement Agent in Polyethylene Terephthalate Glycol for Additive Manufacturing: A Comprehensive Content Optimization Course

,
,
,
,
,
,
,
and
1
Department of Electronic Engineering, Hellenic Mediterranean University, 73133 Chania, Greece
2
Department of Industrial Design and Production Engineering, University of West Attica, 12243 Athens, Greece
3
Institute of Electronic Structure and Laser, Foundation for Research and Technology–Hellas, N. Plastira 100 m, 70013 Heraklion, Greece
4
Physical Metallurgy Laboratory, Mechanical Engineering Department, School of Engineering, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece

Abstract

This study aimed to develop a biochar-modified polyethylene terephthalate glycol (PETG) composite for 3D printing. Biochar prepared from olive tree prunings was compounded with PETG at different loadings and then processed into filaments through a controlled extrusion process. The resultant filaments were used to print test specimens, which were characterized thoroughly by mechanical, thermal, morphological, and rheological methods. The tensile strength (17.8%), flexural strength (15.9%), impact resistance (20.9%), and thermal stability of the biochar-reinforced composites were substantially improved. Overall, the 6.0 wt.% biochar compound exhibited the highest improvement. Scanning electron microscopy and energy-dispersive X-ray spectroscopy confirmed the excellent dispersion of biochar in the PETG matrix. The results demonstrated that biochar is an effective, environmentally friendly material to use as a reinforcing agent for additive manufacturing. The PETG/biochar composites have a promising future for various industrial applications, offering sustainable alternatives with superior performance characteristics.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.