Next Article in Journal
Influence of Constitutive Models and the Choice of the Parameters on FE Simulation of Ti6Al4V Orthogonal Cutting Process for Different Uncut Chip Thicknesses
Next Article in Special Issue
Evaluation of Hardness and Residual Stress Changes of AISI 4140 Steel Due to Thermal Load during Surface Grinding
Previous Article in Journal
Pressing and Infiltration of Metal Matrix Nanocomposites
Previous Article in Special Issue
Surface Integrity Investigation to Determine Rough Milling Effects for Assessment of Machining Allowance for Subsequent Finish Milling of Alloy 718
 
 
Article

Article Versions Notes

J. Manuf. Mater. Process. 2021, 5(2), 55; https://doi.org/10.3390/jmmp5020055
Action Date Notes Link
article xml file uploaded 28 May 2021 07:57 CEST Original file -
article xml uploaded. 28 May 2021 07:57 CEST Update https://www.mdpi.com/2504-4494/5/2/55/xml
article pdf uploaded. 28 May 2021 07:57 CEST Version of Record https://www.mdpi.com/2504-4494/5/2/55/pdf
article supplementary file uploaded. 28 May 2021 07:57 CEST - https://www.mdpi.com/2504-4494/5/2/55#supplementary
article html file updated 28 May 2021 07:58 CEST Original file -
article html file updated 26 July 2022 21:43 CEST Update https://www.mdpi.com/2504-4494/5/2/55/html
Back to TopTop