Next Article in Journal
Anti-Friction and Anti-Wear Mechanisms of Micro Textures and Optimal Area Proportion in the End Milling of Ti6Al4V Alloy
Previous Article in Journal
Effect of Post Treatment on the Microstructure, Surface Roughness and Residual Stress Regarding the Fatigue Strength of Selectively Laser Melted AlSi10Mg Structures
Previous Article in Special Issue
Influence of the Wire Feeding on the Wetting Process during Laser Brazing of Aluminum Alloys with Aluminum-Based Braze Material
 
 
Article

Article Versions Notes

J. Manuf. Mater. Process. 2019, 3(4), 90; https://doi.org/10.3390/jmmp3040090
Action Date Notes Link
article xml file uploaded 17 October 2019 16:36 CEST Original file -
article pdf uploaded. 17 October 2019 16:36 CEST Version of Record https://www.mdpi.com/2504-4494/3/4/90/pdf-vor
article xml file uploaded 25 October 2019 11:49 CEST Update -
article xml uploaded. 25 October 2019 11:50 CEST Update https://www.mdpi.com/2504-4494/3/4/90/xml
article pdf uploaded. 25 October 2019 11:50 CEST Updated version of record https://www.mdpi.com/2504-4494/3/4/90/pdf
article html file updated 25 October 2019 11:51 CEST Original file -
article html file updated 14 February 2020 01:52 CET Update -
article html file updated 20 July 2022 01:24 CEST Update https://www.mdpi.com/2504-4494/3/4/90/html
Back to TopTop