Next Article in Journal
Machining Chatter Prediction Using a Data Learning Model
Next Article in Special Issue
Sustainability Assessment during Machining Ti-6Al-4V with Nano-Additives-Based Minimum Quantity Lubrication
Previous Article in Journal
Effect of SLM Build Parameters on the Compressive Properties of 304L Stainless Steel
Previous Article in Special Issue
Full-Density Fused Deposition Modeling Dimensional Error as a Function of Raster Angle and Build Orientation: Large Dataset for Eleven Materials
Open AccessArticle

Article Versions Notes

J. Manuf. Mater. Process. 2019, 3(2), 44; https://doi.org/10.3390/jmmp3020044
Action Date Notes Link
article xml file uploaded 3 June 2019 11:22 CEST Update https://www.mdpi.com/2504-4494/3/2/44/xml
article xml uploaded. 3 June 2019 11:23 CEST Update https://www.mdpi.com/2504-4494/3/2/44/xml
article pdf uploaded. 3 June 2019 11:23 CEST Updated version of record https://www.mdpi.com/2504-4494/3/2/44/pdf
article html file updated 3 June 2019 11:24 CEST Update https://www.mdpi.com/2504-4494/3/2/44/html
article html file updated 21 October 2019 05:58 CEST Update https://www.mdpi.com/2504-4494/3/2/44/html
article html file updated 12 February 2020 17:15 CET Update https://www.mdpi.com/2504-4494/3/2/44/html
Back to TopTop