Next Article in Journal
Defects, Microstructure, and Hardness of As-Built and Heat-Treated 13 Hot Work Tool Steel and 17-4 PH Stainless Steel Obtained by Fused Filament Fabrication
Previous Article in Journal
Optimization of the Operating Behavior of Spur Gears Through Machine Hammer Peening
Previous Article in Special Issue
Mechanical Characterization and Numerical Modeling of 316 Stainless Steel Specimens Fabricated Using SLM
 
 

Order Article Reprints

Journal: J. Manuf. Mater. Process., 2026
Volume: 10
Number: 83

Article: The Effect of Si and Zr on the Formation of Al3X and V-Phase in a 6005A Alloy with Sc—Part 1: Alloy Design and Heat Treatment Selection
Authors: by Eli Harma, Timothy Langan and Paul Sanders
Link: https://www.mdpi.com/2504-4494/10/3/83

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop