Skip to Content
You are currently on the new version of our website. Access the old version .
  • Article
  • Open Access

23 January 2025

30 Pages

Dynamic Failure Mechanism and Fractal Features of Fractured Rocks Under Quasi-Triaxial Static Pressures and Repeated Impact Loading

,
,
,
,
,
and
1
Key Laboratory of Ministry of Education for Efficient Mining and Safety of Metal Mines, University of Science and Technology Beijing, Beijing 100083, China
2
State Key Laboratory of Coal Resources and Safe Mining, China University of Mining and Technology, Xuzhou 221116, China
3
China Enfi Engineering Corporation, Beijing 100089, China
4
School of City and Architecture Engineering, Zaozhuang University, Zaozhuang 277160, China

Abstract

Mastering the dynamic mechanical behaviors of pre-stressed fractured rocks under repeated impact loads is crucial for safety management in rock engineering. To achieve this, repeated impact loading experiments were performed on produced fractured samples exposed to varying pre-applied axial and confining pressures using a split Hopkinson pressure bar test system in combination with a nuclear magnetic resonance imaging system, and the dynamic failure mechanism and fractal features were investigated. The results indicate that the dynamic stress–strain curves exemplify typical class II curves, and the strain rebound progressively diminishes with growing impact times. The impact times, axial pressure, and confining pressure all significantly affect the dynamic peak strength, average dynamic strength, dynamic deformation modulus, average dynamic deformation modulus, maximum strain, and impact resistance performance. Moreover, under low confining pressures, numerous shear cracks and tensile cracks develop, which are interconnected and converge to form large-scale macroscopic fracture surfaces. In contrast, specimens under a high confining pressure primarily experience tensile failure, accompanied by localized small-scale shear failure. Under low axial pressure, some shear cracks and tensile cracks emerge, while at high axial pressure, anti-wing cracks and secondary coplanar cracks occur, characterized predominantly by shear failure. In addition, as the confining pressure grows from 8 to 20 MPa, the fractal dimensions are 2.44, 2.32, 2.23, and 2.12, respectively. When the axial pressures are 8, 14, and 20 MPa, the fractal dimensions are 2.44, 2.46, and 2.52, respectively. Overall, the degree of fragmentation of the sample decreases with growing confining pressure and grows with rising axial pressure.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.