Abstract
The fractional thermoviscoelastic Biot-squirt flow (thermo-BISQ) model is used in this study to explore elastic-wave propagation through a liquid-saturated porothermoviscoelastic interlayer sandwiched between two thermoelastic solid half-spaces. The formulation combines macroscopic Biot flow, microscopic squirt flow, fractional viscoelasticity of the solid skeleton, fractional viscous behavior of the pore fluid, and thermo-mechanical coupling. The fractional Zener model is employed for the porous skeleton, whereas a fractional viscous model is adopted for the pore fluid. By introducing scalar and vector potentials, the coupled governing equations are decomposed into dilatational and shear components, and the reflection and transmission coefficients are obtained by satisfying the mechanical, hydraulic, and thermal interface conditions. In contrast to the conventional fractional BISQ model, the present formulation predicts three coupled dilatational modes, namely a fast P wave, a slow P wave, and an additional thermally coupled P3 mode, together with one shear mode. In the numerical analysis, the surrounding half-spaces are taken in the elastic limit to highlight the thermo-mechanical coupling within the porous interlayer. Numerical results show that the interlayer thickness and incident frequency produce pronounced oscillatory variations in the reflection and transmission coefficients because of multiple-wave interference. The characteristic squirt-flow length significantly affects the reflection and transmission characteristics. Thermal expansion mainly modifies the dilatational-wave characteristics, while its influence on the shear-wave response is relatively weak, whereas variations in the initial temperature produce comparatively small changes in the external reflection and transmission amplitudes. Comparison with the corresponding nonthermal BISQ model further indicates that thermo-mechanical coupling is manifested more clearly through the modification of the internal dilatational-wave system and the additional P3 mode than through large changes in the external scattering amplitudes. The proposed model provides a unified framework for describing fractional viscoelastic dissipation, squirt-flow effects, thermo-mechanical coupling, and wave scattering in fluid-saturated porous layered media.