Skip to Content
PhotonicsPhotonics
  • Article
  • Open Access

27 July 2026

17 Pages

Double-Layer Sandwich Metasurface for Mid-Infrared Multi-Channel Polarization Detection

,
,
,
and
1
National Key Laboratory on Near-Surface Detection, School of Optics and Photonics, Beijing Institute of Technology, Beijing 100081, China
2
School of Optoelectronic Engineering, Changchun University of Science and Technology, Changchun 130022, China
*
Author to whom correspondence should be addressed.

Abstract

Conventional snapshot-type polarization devices often suffer from inherent ohmic losses caused by the metal structure, resulting in low utilization of system light energy. This research proposes a dual-layer sandwich architecture metasurface that integrates polarization control and high light transmittance for the mid-wave infrared 3~5 μm band. The top metal polarization-selective structures and the bottom dielectric hemispherical anti-reflection (AR) array are integrated monolithically on the same substrate. Specifically, the numerical simulations predict a peak transmittance of 95% at 4.4 and 4.8 μm, while maintaining extinction ratios ranging from 81.8 dB to 84.3 dB. This enables high extinction ratio polarization splitting while significantly broadening the transmittance flux of the device. It breaks the inherent trade-off between “high extinction ratio” and “high transmittance” in polarization devices, providing a high signal-to-noise ratio hardware foundation for high temporal resolution detection.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.