Skip to Content
You are currently on the new version of our website. Access the old version .
ProcessesProcesses
  • Article
  • Open Access

27 December 2024

19 Pages

Pulsation Analysis of Hose Pumps with Different Roller Counts Based on Two-Way FSI

,
,
,
,
and
1
College of Mechanical and Electrical Engineering, Shihezi University, Shihezi 832003, China
2
School of Energy and Materials, Shihezi University, Shihezi 832003, China
3
Institute of Bingtuan Energy Development Research, Shihezi University, Shihezi 832003, China
4
Xinjiang Zhuangeer Yinfen Agricultural Machinery Equipment Co., Ltd., Wujiaqu 831300, China
This article belongs to the Section AI-Enabled Process Engineering

Abstract

Xinjiang, as a major agricultural region, offers extensive application potential for hose pumps, given their excellent performance as fertilization devices. Analyzing the pulsation characteristics of hose pumps during operation is valuable for reducing noise and extending pump service life. To investigate the pulsation characteristics and unsteady flow of hose pumps with different roller numbers, this study adopts a bidirectional fluid-structure interaction (FSI) method and utilizes ANSYS 19.0 commercial finite element software to analyze the outlet and inlet pressure pulsations, outlet flow velocity pulsations, and the distribution of the flow field at the intermediate plane for both two-roller and three-roller pumps transporting high and low Reynolds number fluids under the same working conditions. It was observed that the three-roller pump exhibited higher outlet pressure compared with the inlet and that the pulsation intensity was lower in the three-roller pump than in the two-roller pump under the same conditions, with an analysis provided on the reasons for this phenomenon. This study offers theoretical support for the selection and further optimization of hose pump designs. To further reduce the negative effects of pulsations, it is recommended to increase the number of rollers in the design while also considering shape optimization of the pump casing or using feedback control systems to adjust and reduce pulsation intensity.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.