Processes, Volume 12, Issue 8

This manuscript presents a model of a system implementing individual stages of production for long steel products resulting from rolling. The system encompasses the order registration stage, followed by production planning based on information about...

The accuracy of determining arsenic and lead using the optical technique Slurry–Total Reflection X-ray Fluorescence (Slurry-TXRF) was significantly enhanced through the application of a machine learning method, aimed at improving the ecological...

Performance analysis of the adsorptive separation of ethylene downstream of an oxidative coupling of methane (OCM) process, being an alternative process for converting methane content of natural gas or other methane-rich sources to ethylene, was stud...

This paper uses a bottom-up national energy technology model to study the optimization of China’s energy transformation pathway. The model clarifies specific action plans for China’s energy transformation pathway from 2020 to 2060, total...

The autogenous manual gas tungsten arc welding (GTAW) process was used for cladding austenitic stainless steel 316L using a single pass with various contact tip-to-work distances (CTWDs). Immersion and electrochemical tests were used to evaluate the...

The saturate, aromatic, resin, and asphaltene content in petroleum (SARA composition) provides valuable information about the chemical nature of oils, oil compatibility, colloidal stability, fouling potential, and other important aspects in petroleum...

The objective of this research was to study the drying kinetics of passion fruit seeds, a byproduct of the industrial processing of passion fruit with the potential to elaborate food products such as oil and flour. After drying, the seeds were direct...

Combining electrolytic hydrogen production with wind–photovoltaic power can effectively smooth the fluctuation of power and enhance the schedulable wind–photovoltaic power, which provides an effective solution to solve the problem of wind...

The physical characteristics of coal reservoirs are important factors affecting the occurrence status of coalbed methane, as well as key factors restricting the production capacity. Therefore, taking 3# coal in Qinnan region of China as the research...

Old-well sidetracking is a key method for controlling low-productivity wells in the Bohai oilfield. This study employs reservoir engineering and numerical simulation techniques to investigate the maximum drainage radius and natural coning control mec...