Abstract
Closed-loop stability and road holding are rarely included in metaheuristic tuning of active suspension controllers. A constrained framework is proposed. Each candidate is screened for sampled-data stability and a 6 dB simultaneous gain margin before simulation. Working-space and road-holding limits are penalized. The framework is applied to PID, fractional-order PID (FOPID) and tilt-integral-derivative with filtered derivative and filtered double-derivative term (TIDFDD) controllers. A linear half-car model with actuator dynamics and a 1 ms digital loop is used. The objective combines road tracking and ISO 2631-1 weighted seat acceleration. Six recent metaheuristics are compared with equal budgets per structure, 30 runs per algorithm–controller pair and non-parametric tests. A full-state linear quadratic regulator (LQR), tuned in the same way, serves as a model-based reference. The C/MEX implementation is verified against an independent Simulink model. TIDFDD reduced weighted seat acceleration by 50% on ISO 8608 roads, versus 45% for PID and FOPID. The road-holding constraint was active in all final solutions. With ideal full-state measurements, the LQR achieved a 59% reduction. In the tested delay and parameter-variation scenarios, the PID-family controllers showed smaller performance losses and larger stability margins. The TIDFDD advantage depends on convergence to the better of two observed attraction basins.