Abstract
We study products of extended Cesàro and composition operators between radial Bloch-type spaces on the unit ball of a complex Banach space. We characterize boundedness in terms of the symbols and and establish two-sided operator-norm estimates. Under a relative compactness assumption on the interior images of , we characterize compactness through a boundary vanishing condition. In the finite-dimensional setting, we also derive two-sided essential-norm estimates in terms of the corresponding boundary quantity. Applications to classical Bloch, power-type, logarithmic, and iterated logarithmic weights yield explicit integral expressions and corresponding norm estimates.
Keywords:
extended Cesàro operators; composition operators; radial Bloch-type spaces; complex Banach spaces; boundedness; compactness; operator norm; essential norm MSC:
47B38; 47B33; 46E15
1. Introduction
Let X be a complex Banach space, with open unit ball , and let denote the holomorphic functions on . For , we write
where is the Fréchet derivative. Given a positive continuous weight on , the radial Bloch-type space consists of those for which
We work with normal weights: a positive continuous weight is normal if there are and such that decreases to zero and increases to infinity as , on . Integral operators have long been studied on Hardy, Bergman, and Bloch-type spaces. Early work on Cesàro-type and related operators includes [1,2,3,4]. On finite-dimensional balls, Hu [5], Wang and Hu [6], and Tang [7] obtained results for extended Cesàro operators on Bloch and Bloch-type spaces. Hamada [8] subsequently studied these operators on radial Bloch-type spaces over the unit ball of a complex Banach space, developing estimates and auxiliary functions suited to normal weights. For , the extended Cesàro operator is
If is holomorphic, let . We consider the product in the specified order
so that
The radial derivative has the particularly useful form
Thus the mapping properties of the product depend both on evaluation at and on the radial derivative of . Products of composition and integral operators are not new. Li and Stević [9] treated Volterra-type products on classical analytic function spaces; Liang and Zhou [10] and Yang [11] studied related operators between other holomorphic function spaces. More directly relevant here, Quang [12] investigated extended Cesàro composition operators on weak Bloch-type spaces over Hilbert balls, and Lam and Quang [13] obtained boundedness, compactness, and norm estimates for related operators on finite-dimensional balls. These results make it important to distinguish the setting and hypotheses of the present work from those already considered. Our focus is the product acting between radial Bloch-type spaces on a general complex Banach ball. The infinite-dimensional setting matters most in the compactness argument: a norm-bounded subset of need not have compact closure, even when it stays a positive distance from the boundary. We therefore assume, for the compactness characterization, that the interior images
are relatively compact for each . This condition is automatic in finite dimensions. In a general Banach space it supplies the compact sets needed for a diagonal subsequence argument; we do not claim it is necessary for compactness in every case. We establish necessary and sufficient conditions for boundedness of the product operator between radial Bloch-type spaces, together with two-sided operator-norm estimates. Under the stated weight and relative compactness hypotheses, we characterize compactness through a boundary-vanishing condition. We also obtain two-sided essential-norm estimates in the finite-dimensional setting, where compact dilation operators are available. The estimates use weight-dependent point-evaluation bounds rather than exact evaluation-norm formulas. These conclusions extend the analysis to the radial Banach-space framework while retaining explicit limits on what the compactness and essential-norm arguments establish. We illustrate the criteria for classical Bloch, power-type, logarithmic, and iterated logarithmic weights. Section 2 treats boundedness and operator norms; Section 3 addresses compactness; Section 4 considers essential norms; and Section 5 gives the weight examples.
2. Boundedness of
In this section, we characterize the boundedness of the extended Cesàro composition operator
where and are normal weights. We also obtain an equivalent estimate for the operator norm. We first record the following point-evaluation estimate.
Lemma 1.
Let ω be a normal weight. Then, there exists a constant , depending only on ω, such that for every and ,
where
Proof.
Set and let Fix . By the radial integration formula,
We first consider . Splitting the integral gives
To estimate the first integral, observe that the holomorphic function
vanishes at zero and is bounded in modulus by . Schwarz’s lemma therefore yields
Consequently,
For the second integral, the definition of M gives
Combining these estimates, we obtain
If , Schwarz’s estimate applies throughout the radial segment, so
Thus, for every ,
Since it follows that
This completes the proof. □
We next record the test-function construction of Hamada [8] (Lemmas 2.1, 2.6 and 2.7). We state the precise properties needed below because they are essential in both the boundedness and compactness arguments.
Lemma 2.
Let ω be a normal weight. Denote
where denotes the greatest integer not exceeding x, and the inverse is taken on the strictly decreasing restriction . For , the number lies in the range of this restriction, so is well defined. Let
Then,
- (i)
- g is holomorphic on , is increasing on , and
- (ii)
- There exists a constant such thatwhere is the unique number satisfying . Such a number exists because for , so . The comparison estimate and are as in Hamada [8] (Lemma 2.1(ii)).
Lemma 3.
Let be the function defined in Lemma 2. For each , set
For , define
Then, and where is the constant in Lemma 2.
Theorem 1.
Let X be a complex Banach space, let ω and μ be normal weights, let be holomorphic, and let . Then is bounded if and only if
Moreover,
where
Proof.
Suppose first that (7) holds. Let . By (2),
By Lemma 1,
Therefore,
Since
we obtain
Thus, is bounded and
Conversely, suppose that is bounded. Taking , we have
and (2) gives
Hence,
We next estimate the integral term. Fix and set Let be the constant appearing in Lemma 2. Suppose first that . Let be the function defined in Lemma 3. Then,
Since we have Therefore, by Lemma 2,
Remark 1.
Suppose that
Then,
Consequently, the boundedness condition for reduces to
Thus, in this case, is bounded if and only if
Corollary 1.
Let ω and μ be normal weights, and let . Define
Then, is bounded if and only if . Moreover,
where
Proof.
The result follows from Theorem 1 by taking . □
3. Compactness of
In this section, we study the compactness of the operator Since X may be infinite-dimensional, an additional relative compactness condition is needed. For , define
We assume that is relatively compact in for every . This hypothesis is used in the sufficiency proof to ensure that is compact in for every . In infinite-dimensional spaces, we do not claim that this hypothesis is necessary for the compactness of .
We use the following compactness criterion formulated in terms of bounded nets, following the approach of Blasco et al. [14] (Lemma 4.4). The proof is straightforward and is therefore omitted.
Lemma 4.
Let X be a complex Banach space, let ω and μ be normal weights, let be holomorphic, and let . Suppose that is bounded. Then is compact if and only if, for every bounded net in such that uniformly on compact subsets of , we have
Lemma 5
([8] (Lemma 2.7)). For with , let
Then, and
Moreover, if then converges to 0 uniformly on any closed ball strictly inside as .
We now give the compactness characterization.
Theorem 2.
Let X be a complex Banach space, let ω and μ be normal weights, let be holomorphic, and let . Suppose that
and that the relative compactness assumption above holds. Then is compact if and only if it is bounded and
Proof.
Suppose that is bounded and that
Let be a bounded net in such that uniformly on compact subsets of , and put
Let . Since
and the boundary condition holds, we can choose sufficiently close to 1 such that
and
For , we have
Hence, by Lemma 1,
Therefore,
Since is bounded,
By the relative compactness assumption, is compact in . Hence,
Consequently,
Since is arbitrary,
Thus, is compact by Lemma 4.
Conversely, suppose that is compact. Then it is bounded. Let satisfy and put After discarding finitely many terms, we may assume that . Set By Lemma 5, and uniformly on compact subsets of . By the compactness of and Lemma 4,
On the other hand,
Since
and , Lemma 2 gives
Therefore,
Thus, by (15),
Since the left-hand side tends to zero, we conclude that
□
Remark 2.
Suppose that
Then, the boundary condition in the compactness theorem is automatically satisfied, since cannot approach 1. Consequently, if is relatively compact in , then is compact whenever it is bounded. In view of the boundedness criterion, in this case we have
Corollary 2.
Let X be a finite-dimensional complex Banach space, and let ω and μ be normal weights satisfying
Let and suppose that is bounded. Then, is compact if and only if
Proof.
Take in Theorem 2. Since X is finite dimensional, for every the set
is compact. Hence, the relative compactness hypothesis in Theorem 2 is satisfied. □
Remark 3.
The finite-dimensional assumption in Corollary 2 ensures that the relative compactness hypothesis of the preceding theorem is satisfied when . Hamada [8] (Theorem 4.2(ii)) obtained a compactness characterization for extended Cesàro operators on general complex Banach spaces under a different relative compactness condition. Specifically, for every and , the sets
are assumed to be relatively compact in . Thus, Hamada’s result does not require X to be finite-dimensional, but imposes an additional condition involving the weighted radial derivative of the symbol.
4. Essential Norm of
In this section, we obtain estimates for the essential norm of . Recall that the essential norm of a bounded linear operator is defined by
For , set
where the supremum is understood to be zero if the set is empty. Also, set
For , define the dilation operator , . We first establish its compactness in finite dimensions by a direct subsequence argument.
Lemma 6.
Let X be a finite-dimensional complex Banach space and let ω be a normal weight. Then, for each , is a compact operator on .
Proof.
Fix and let be a bounded sequence in . Since X is finite-dimensional, every closed bounded subset of X is compact. By the point-evaluation estimate and Cauchy estimates, is locally uniformly bounded and equicontinuous. Montel’s theorem therefore yields a subsequence converging uniformly on compact subsets of to a holomorphic function f. Moreover, Cauchy estimates imply that uniformly on the compact ball .
Since a normal is bounded on , we obtain
The point-evaluation estimate and Cauchy estimates also imply that is bounded. Since every bounded sequence admits a subsequence for which converges in the norm of , the operator is compact. □
To establish the lower essential-norm estimate, we first prove the following weak-convergence lemma, adapting the -space approach of Miralles and Maletzki [15] to the radial Bloch-type setting.
Lemma 7.
Let X be a finite-dimensional complex Banach space, and let ω be a positive continuous radial weight on . Suppose that is a bounded sequence in such that uniformly on compact subsets of . Then,
Consequently, if Y is a Banach space and is compact, then
Proof.
Set
For , define
Since ,
Moreover, is continuous on . For every , the boundary-vanishing condition gives such that whenever . Hence, is closed and contained in the compact set . Thus, . Since ,
Thus, is a linear isometry and, in particular, is injective. Now define Then, . Since uniformly on compact subsets of , in particular Hence, uniformly on compact subsets of . Since X is finite dimensional, the Cauchy estimates applied on slightly larger compact balls imply that uniformly on every compact subset of . Therefore, for each , . Consequently,
Since is bounded in , there exists a constant such that
for all j. In particular,
for every j and every . We now prove that
Let . Since J is an isometric embedding, the functional defined on the linear subspace of by
is well defined and bounded. Indeed,
By the Hahn–Banach theorem, extends, with the same norm, to a bounded linear functional
By the Riesz–Markov representation theorem, there exists a finite complex regular Borel measure on , with , such that
Therefore,
For every , the integrand converges to zero and its absolute value is bounded by M. Since , the dominated convergence theorem (with respect to ) yields
Since was arbitrary, in We now show that converges weakly to zero. Let The restriction belongs to , and therefore Since and the constant function belongs to , we have
Both terms on the right-hand side tend to zero. Thus, Since L was arbitrary, it follows that
Finally, suppose that is compact. Since bounded linear operators preserve weak convergence,
If did not tend to zero, there would exist and a subsequence such that
for every k. By compactness of K, a further subsequence would converge in norm to some . Norm convergence implies weak convergence, whereas
Hence, , contradicting
Therefore,
□
We can now obtain the two-sided estimate.
Theorem 3.
Let X be a finite-dimensional complex Banach space, let ω and μ be normal weights, let be holomorphic, and let . Assume that and that is bounded. Then,
Consequently,
Proof.
We first establish the upper estimate. By Lemma 6, the operator is compact for every . Hence,
Fix and set By Theorem 1, . Let By (2),
If , then
Let Since ,
Consequently,
Now suppose that and put . Then,
Since ,
Therefore,
Combining (16) and (17), we obtain
Hence,
Letting gives
Finally, letting yields
We next establish the lower estimate. If , the lower estimate is immediate. Suppose . By the definition of , choose such that and
Set and Since , after discarding finitely many terms we may assume that . By Lemma 5, and uniformly on compact subsets of . Let be any compact operator. Its restriction is compact. By Lemma 7,
Since and , Lemma 2 gives
Therefore,
Using and inequality (18), we obtain
Letting gives
Therefore,
Taking the infimum over all compact operators K yields
This completes the proof. □
Remark 4.
The finite-dimensionality assumption is used in the weak-convergence argument for the test functions in the little radial Bloch-type space. In particular, it makes locally compact, permitting the Riesz–Markov representation theorem to be applied to .
Corollary 3.
Let X be a finite-dimensional complex Banach space, let ω and μ be normal weights satisfying , and let Suppose that is bounded. Then
Proof.
Take in Theorem 3. □
5. Examples of Normal Weights
In this section, we apply the preceding results to several important classes of normal weights: the classical Bloch weight, power-type weights, logarithmic weights, and iterated logarithmic weights. We also obtain the corresponding essential-norm estimates under the hypotheses of Theorem 3. For the weights considered below, the point-evaluation bounds give explicit two-sided operator-norm estimates. Every essential-norm assertion in this section assumes that X is finite dimensional and is bounded, as required by Theorem 3. Compactness of the dilation operators then follows from Lemma 6; it is not an additional assumption. For , let
Since and
we have
Thus, two-sided estimates for yield corresponding two-sided estimates for .
5.1. The Classical Bloch Weight
Let
This weight is normal: near the boundary it is comparable to , so the normal-weight exponents can be chosen with . The corresponding radial Bloch norm is
Moreover,
We obtain explicit two-sided estimates for the point-evaluation norm. For , choose such that
and define
Then, and
Since
we obtain
Hence, , while
Here, and . Combining this test function and the constant function with Lemma 1, we obtain
Therefore,
Since
under the hypotheses of Theorem 3,
5.2. Power-Type Bloch Spaces
Let
This is a normal weight: choose . The restriction is used here to ensure divergence of the associated growth integral and hence applicability of the essential-norm theorem. The associated radial Bloch-type norm is
We have
The point-evaluation norm again admits explicit two-sided estimates. For , choose such that and define
Then, and
Since
it follows that
Thus, , and
Here, and . Combining this test function and the constant function with Lemma 1, we obtain
Therefore,
Since ,
Hence, under the hypotheses of Theorem 3,
5.3. Logarithmic Bloch-Type Spaces
Consider
This is a normal weight: for example, any gives the required eventual monotonicity, since logarithmic growth is slower than every positive power of . The corresponding radial Bloch-type norm is
A direct calculation gives
In this case, the preceding general estimates give
Consequently,
Since
under the hypotheses of Theorem 3,
5.4. Iterated Logarithmic Bloch Spaces
For , let
where
and is chosen sufficiently large so that for and . For each fixed k, such an a exists. The resulting weight is normal because its slowly varying logarithmic factor lies between any two sufficiently close powers of near the boundary. The corresponding radial Bloch-type norm is
Since
we have
Equivalently,
Thus,
It follows that
Finally,
and therefore, under the hypotheses of Theorem 3,
6. Conclusions
We established boundedness and compactness criteria for on radial Bloch-type spaces over complex Banach balls, together with operator-norm and essential-norm estimates. Applications to standard normal weights yield explicit integral expressions and two-sided norm estimates. The compactness characterization assumes relative compactness of the interior images of , a sufficient condition whose necessity is not established. The two-sided essential-norm estimate requires finite dimensionality. Extending these estimates to infinite-dimensional Banach spaces remains a direction for future research.
Author Contributions
Conceptualization, R.A. and N.H.; writing—original draft, R.A. and N.H.; writing—review and editing, R.A. and N.H. All authors have read and agreed to the published version of the manuscript.
Funding
The authors were supported by Researchers Supporting Project number (RSPD2026R640), King Saud University, Riyadh, Saudi Arabia.
Data Availability Statement
No new data were created or analyzed in this study. Data sharing is not applicable to this article.
Acknowledgments
The authors extend their appreciation to King Saud University, Saudi Arabia for funding this research work through grant number: RSPD2026R640.
Conflicts of Interest
The authors declare no conflicts of interest.
References
- Aleman, A.; Cima, J.A. An integral operator on Hp and Hardy’s inequality. J. Anal. Math. 2001, 85, 157–176. [Google Scholar] [CrossRef] [Scilit]
- Aleman, A.; Siskakis, A.G. Integration operators on Bergman spaces. Ind. Univ. Math. J. 1997, 46, 337–356. [Google Scholar] [CrossRef] [Scilit]
- Xiao, J. Cesàro-type operators on Hardy, BMOA and Bloch spaces. Arch. Math. 1997, 68, 398–406. [Google Scholar] [CrossRef] [Scilit]
- Xiao, J. Riemann–Stieltjes operators on weighted Bloch and Bergman spaces of the unit ball. J. Lond. Math. Soc. 2004, 70, 199–214. [Google Scholar] [CrossRef] [Scilit]
- Hu, Z. Extended Cesàro operators on the Bloch space in the unit ball of . Acta Math. Sci. Ser. B Engl. Ed. 2003, 23, 561–566. [Google Scholar] [CrossRef] [Scilit]
- Wang, S.S.; Hu, Z.J. Generalized Cesàro operators on Bloch-type spaces. Chin. Ann. Math. Ser. A 2005, 26, 613–624. [Google Scholar]
- Tang, X. Extended Cesàro operators between Bloch-type spaces in the unit ball of . J. Math. Anal. Appl. 2007, 326, 1199–1211. [Google Scholar] [CrossRef] [Scilit]
- Hamada, H. Bloch-type spaces and extended Cesàro operators in the unit ball of a complex Banach space. Sci. China Math. 2019, 62, 617–628. [Google Scholar] [CrossRef] [Scilit]
- Li, S.; Stević, S. Products of Volterra type operator and composition operator from H∞ and Bloch spaces to Zygmund spaces. J. Math. Anal. Appl. 2008, 345, 40–52. [Google Scholar] [CrossRef] [Scilit]
- Liang, Y.-X.; Zhou, Z.-H. Product of extended Cesàro operator and composition operator from Lipschitz space to F(p, q, s) space on the unit ball. Abstr. Appl. Anal. 2011, 2011, 152635. [Google Scholar] [CrossRef] [Scilit]
- Yang, W. Volterra composition operators from F(p, q, s) spaces to Bloch-type spaces. Bull. Malays. Math. Sci. Soc. 2011, 34, 267–277. [Google Scholar]
- Quang, T.T. Extended Cesàro composition operators on weak Bloch-type spaces on the unit ball of a Hilbert space. arXiv 2022, arXiv:2203.05129. [Google Scholar]
- Lam, L.V.; Quang, T.T. On the boundedness and compactness of extended Cesàro composition operators between weighted Bloch-type spaces. Hacet. J. Math. Stat. 2024, 53, 894–914. [Google Scholar] [CrossRef] [Scilit]
- Blasco, O.; Galindo, P.; Lindström, M.; Miralles, A. Composition operators on the Bloch space of the unit ball of a Hilbert space. Banach J. Math. Anal. 2017, 11, 311–334. [Google Scholar] [CrossRef] [Scilit]
- Miralles, A.; Maletzki, M.P. On interpolating sequences for Bloch type spaces. J. Math. Anal. Appl. 2022, 511, 126079. [Google Scholar] [CrossRef] [Scilit]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2026 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.