Abstract
Hydrophobic calcium carbonate (CaCO3/SA) was developed by modifying calcium carbonate (CaCO3) nanoparticles with stearic acid (SA) and applying it to the removal of water-soluble dye (Rhodamine B, RhB) from water. The adsorption performance of hydrophobic CaCO3/SA to RhB dye was studied by dispersing CaCO3/SA in aqueous solution through amphiphilic molecule (AM)-wetting treatment. Under perfect wetting conditions, the negatively charged CaCO3/SA (zeta potential: −23.78 mV) exhibited efficient RhB capture driven by synergistic electrostatic attraction and hydrophobic interactions. The adsorptive process follows the pseudo-first-order (PFO) kinetic model and Freundlich isothermal model. Mechanistically, hydrophobic groups introduced into the material increase active sites, inhibit nanoparticle agglomeration, reduce water molecule competition for adsorption sites, and synergistically drive adsorption via hydrophobic interactions and electrostatic attraction. Notably, pure ethanol as desorption solvent shifts the zeta potential to +2.39 mV, creating electrostatic repulsion for RhB. Coupled with the high solubility of RhB in ethanol, these effects facilitate dye release and allow the adsorbent to be regenerated over eight consecutive cycles with 98% capacity retention. This strategy, which regulates the entire adsorption–desorption cycle solely through amphiphilic molecules without complex material design, presents an economical, practical, and sustainable solution for dye wastewater treatment.