In the original publication [1], there was a mistake in Figure 5A as published. Due to the author’s oversight, a “Control” image in Figure 5A was duplicated as “PLA” and “0.5 wt% GO-PLA”. Hereby, these images have been replaced with the correct ones. The corrected Figure 5 appears below.
Figure 5.
Antibacterial activity of PLA and 0.5 wt% GO-PLA films. Photographs of recultivated (A) Aa and (C) Sm colonies cultured on the PLA and 0.5 wt% GO-PLA films the for 24 h. (B,D) Analysis of reduction percentages of bacteria colonies. (E) SEM images of Aa and Sm cells. (**) p < 0.01. (scale bar = 1 μm).
The authors state that they are profoundly sorry for the mistake made and that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Reference
- Liu, K.; Lai, W.; Wu, J.; Lu, Y. Enhanced Osteogenic Activity and Antibacterial Properties of Graphene Oxide-Poly(Lactic Acid) Films for the Repair of Cranial Defects in Rats. Coatings 2024, 14, 223. [Google Scholar] [CrossRef] [Scilit]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).