Order Article Reprints

Liu L, Thangaraj M, Karmiris-Obratański P, Zhou Y, Annamalai R, Machnik R, Elsheikh A, Markopoulos AP. Optimization of Wire EDM Process Parameters on Cutting Inconel 718 Alloy with Zinc-Diffused Coating Brass Wire Electrode Using Taguchi-DEAR Technique. Coatings. 2022; 12(11):1612. https://doi.org/10.3390/coatings12111612

Liu, Lijun, Muthuramalingam Thangaraj, Panagiotis Karmiris-Obratański, Yuanhua Zhou, Ramamurthy Annamalai, Ryszard Machnik, Ammar Elsheikh, and Angelos P. Markopoulos. 2022. "Optimization of Wire EDM Process Parameters on Cutting Inconel 718 Alloy with Zinc-Diffused Coating Brass Wire Electrode Using Taguchi-DEAR Technique" Coatings 12, no. 11: 1612. https://doi.org/10.3390/coatings12111612

Liu, L., Thangaraj, M., Karmiris-Obratański, P., Zhou, Y., Annamalai, R., Machnik, R., Elsheikh, A., & Markopoulos, A. P. (2022). Optimization of Wire EDM Process Parameters on Cutting Inconel 718 Alloy with Zinc-Diffused Coating Brass Wire Electrode Using Taguchi-DEAR Technique. Coatings, 12(11), 1612. https://doi.org/10.3390/coatings12111612