Skip to Content
NanomaterialsNanomaterials
  • Article
  • Open Access

6 October 2021

20 Pages

Carbon Fiber Reinforced Composites: Study of Modification Effect on Weathering-Induced Ageing via Nanoindentation and Deep Learning

,
,
and
1
RNANO Lab—Research Unit of Advanced, Composite, Nano Materials & Nanotechnology, School of Chemical Engineering, National Technical University of Athens, Zographos, GR-15773 Athens, Greece
2
Innovation in Research & Engineering Solutions (IRES), Boulevard Edmond Machtens 79/22, 1080 Brussels, Belgium
*
Author to whom correspondence should be addressed.

Abstract

The exposure of carbon-fiber-reinforced polymers (CFRPs) to open-field conditions was investigated. Establishment of structure–property relations with nanoindentation enabled the observation of modification effects on carbon-fiber interfaces, and impact resistance. Mapping of nanomechanical properties was performed using expectation-maximization optimization of Gaussian fitting for each CFRPs microstructure (matrix, interface, carbon fiber), while Weibull analysis connected the weathering effect to the statistically representative behavior of the produced composites. Plasma modification demonstrated reduced defect density and improved nanomechanical properties after weathering. Artificial intelligence for anomaly detection provided insights on condition monitoring of CFRPs. Deep-learning neural networks with three hidden layers were used to model the resistance to plastic deformation based on nanoindentation parameters. This study provides new assessment insights in composite engineering and quality assurance, especially during exposure under service conditions.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.