Skip to Content
You are currently on the new version of our website. Access the old version .
  • Article
  • Open Access

30 July 2024

22 Pages

Identification and Positioning Method of Bulk Cargo Terminal Unloading Hopper Based on Monocular Vision Three-Dimensional Measurement

,
,
,
,
and
1
College of Transport & Communications, Shanghai Maritime University, Shanghai 201306, China
2
Logistics Engineering College, Shanghai Maritime University, Shanghai 201306, China
3
Shanghai SMUVision Smart Technology Ltd., Shanghai 201306, China
4
Higher Technology School, Shanghai Maritime University, Shanghai 201306, China

Abstract

Rapid identification and localization of dry bulk cargo hoppers are currently core issues in the automation control of gantry cranes at dry bulk terminals. The current conventional method relies on LiDAR systems for the identification and positioning of bulk unloading hoppers. However, this approach is complex and costly. In contrast, GPS-based positioning solutions for bulk unloading hoppers are prone to damage due to the vibrations generated during the operation process. Therefore, in this paper, a hopper localization system based on monocular camera vision is proposed to locate the position of the bulk unloading hopper. The hopper identification and localization process are divided into three stages. The first stage uses the improved YOLOv5 model to quickly and roughly locate the hopper target. The second stage uses morphological geometrical features to locate the corner points of the hopper target. The third stage determines the three-dimensional coordinates of the hopper target by solving the position of the corner points in the world coordinate system through the PnP (Perspective-n-Point) algorithm. The experimental results show that the average positioning accuracy of the coordinates of the method is above 93%, demonstrating the accuracy and effectiveness of the method.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.