1. Introduction
Rock mechanics was developed to solve stability, failure and fragmentation problems in rock engineering, yet its subject remains one of the most complex materials in civil, mining, energy and geological engineering. Natural rock masses contain bedding, joints, cleats, pores, mineral fabrics, healed fractures and weathered interfaces, distributed irregularly from the grain scale to the engineering scale. Their response is further shaped by high in situ stress, groundwater, temperature, chemical reactions, excavation disturbance and time-dependent deformation. This complexity explains why rock mechanics draws on solid mechanics, soil mechanics, engineering geology, mining engineering and computational science rather than a single disciplinary theory. Its central task is not only to measure rock properties, but also to express structural uncertainty, identify dominant mechanisms and transform unstable geological media into analyzable and controllable engineering systems.
Structured and fractured rock masses pose a core challenge because their strength and failure are governed by the geometry, persistence and activation of internal discontinuities. Bedding, schistosity and joint sets make strength dependent on loading direction, confining pressure and weakness-plane activation. Experimental and numerical studies have established strength criteria for anisotropic and jointed rocks and clarified the deformation of stratified rock masses in tunneling [1,2,3]. The intermediate principal stress and columnar joint geometry can further reshape strength envelopes and failure paths [4,5,6]. At the fracture scale, hydromechanically coupled and phase-field models capture non-planar hydraulic fracture propagation, fracture nucleation and rate-dependent fracture growth [7,8,9]. Mesoscale and fracture-scale simulations also indicate that material heterogeneity and pre-existing fractures influence crack propagation paths [10,11]. These findings suggest that structural planes are organizing elements that control damage initiation, localization and engineering instability.
Water–rock–stress coupling links mechanical stability with pore-scale transport, chemical reactions and environmental safety in fractured and porous rocks. In fractured carbonate rocks, acid dissolution can enlarge apertures and redirect flow, although dissolution at contacting asperities may also promote fracture closure and reduce permeability [12,13]. Carbonate content, rock texture and fracture roughness further influence transmissivity and acid-etching patterns [14]. Mineral suspension and dissolution can also alter strength and compressibility in soft carbonate rocks [15]. In fracture networks, flow partitioning at intersections and stress-induced closure influence solute transport [16,17]. Field injection tests provide estimates of fracture aperture variability and relative permeability [18], while ultrasonic measurements combined with X-ray CT help characterize progressive fracture damage in carbonate rocks [19]. Studies of shale–fluid interactions, CT-based sandstone models and ultrasonic responses across filled joints further show how pore fluids, stress, clay minerals and saturation affect transport behavior and monitoring signals [20,21,22]. Saturation-dependent wave velocity correlations suggest that geophysical signals can constrain strength and damage state when calibrated against rock type and water content [23].
Engineering construction places rock mass behavior in direct interaction with tunnels, roadways and support systems, where excavation disturbance and reinforcement jointly control stability. In underground openings, drill-and-blast excavation generates dynamic cracks and vibrations, making delay timing, vibration characterization and modeling of rock fragmentation important for understanding and controlling excavation damage [24,25,26]. In fractured or water-rich ground, grouting reinforcement has shifted from empirical sealing toward mechanistic analysis of coupled deformation, non-Darcy seepage and obstruction-controlled grout diffusion [27,28,29]. Intelligent inversion of surrounding rock parameters, combined with three-dimensional numerical modeling, can inform support optimization for underground excavations; a study of a water diversion surge shaft demonstrated that incorporating long anchor cables reduced surrounding-rock deformation and limited plastic-zone development [30]. Dynamic hazards also require attention, as shaking table tests and energy-absorbing support systems show that void interaction, seismic loading and impact disturbance can alter underground structural damage modes [31,32].
Underground energy storage, wellbore drilling and cold-region geotechnics extend rock mechanics to long-term safety under coupled and evolving boundary conditions. Salt cavern gas storage requires tightness evaluation of cap rocks and interlayers in bedded salt formations, because their permeability governs potential leakage pathways and sealing reliability [33]. Coal and shale drilling require stability models that consider weakness patches, bedding and anisotropic fracture toughness, since continuum assumptions may underestimate collapse risk and trajectory sensitivity [34,35]. Frozen soils introduce another coupling mechanism: unfrozen water, suction and phase change influence thermal, hydraulic and mechanical behavior in cold-region foundations, tunnels and slopes [36]. Across these applications, a rock mass is not a fixed material with constant parameters, but an evolving system whose states are altered by engineering operations. Future progress depends on integrating testing, monitoring, modeling and field feedback to translate complex mechanisms into robust design and risk-control strategies.
2. Special Issue Content
The papers in this Special Issue make coordinated contributions to the understanding and solution of complex rock mechanics problems. Triaxial testing, digital core imaging, CT scanning, acoustic emission monitoring, ultrasonic transmission experiments, phase-field modeling, pore-scale reconstruction, theoretical analysis, numerical simulation and field validation are combined across the collection. This methodological diversity reflects the nature of the topic itself: rock engineering stability depends on the coupling of structure, stress, water, temperature, time and construction disturbance, and therefore requires evidence from multiple scales and disciplines. By bringing together laboratory observation, theoretical interpretation, numerical modeling and engineering verification, this Special Issue highlights the need to understand rock masses as evolving systems rather than as isolated materials under a single-factor control.
In the field of rock mass structure, strength and fracture mechanisms, several studies provide new insight into the failure of heterogeneous or anisotropic rocks. Comparative evaluation of anisotropic strength criteria under different bedding orientations and confining pressures shows that failure may shift among bedding-parallel sliding, cross-bedding shear and hybrid mechanisms (contribution 1). Real-time CT scanning and acoustic emission monitoring further reveal self-organized criticality and yield-stage precursors during sandstone fracture, providing a possible basis for instability prediction (contribution 2). Fracture competition and non-planar propagation in crystalline rocks are also clarified through a hydro-mechanical phase-field model, which demonstrates the controlling role of grain-scale heterogeneity in fracture paths, pressure evolution and local failure modes (contribution 3). Together, these studies strengthen the mechanical expression of rock structure, clarify the transition from microscopic damage to macroscopic failure, and provide a more detailed basis for interpreting instability processes in structurally complex rock masses.
In the field of water–rock–stress coupling, pore-scale transport and environmental rock mechanics, the collected papers show how fluid and pore structures reshape engineering behavior. Three-dimensional digital core imaging, dissolution experiments and reactive numerical simulation are used to examine the interaction between phosphogypsum leachate and carbonate rocks, highlighting the role of fracture aperture and preferential flow in karst dissolution (contribution 4). The Quartet Structure Generation Set method is used to reconstruct rock pore structures and quantify how porosity, pore distribution, water saturation and temperature affect radon diffusion and permeability (contribution 5). Under dry and saturated conditions, ultrasonic wave transmission experiments link igneous-rock saturation, pore–fracture development and acoustic signal attenuation (contribution 6). These studies extend rock mechanics from strength evaluation to coupled migration, detection and environmental safety assessment, emphasizing that fluid transport, pore evolution and physical signal response are integral to the assessment of rock engineering behavior.
In engineering control, construction disturbance and rock mass reinforcement, this Special Issue presents practical solutions for mines, tunnels, slopes and underground excavations. Directional blasting in prefabricated grooved concrete shows that vertical stress can improve crack guidance and stabilize propagation velocity (contribution 7). For deep multi-coal seam mining, a hierarchical deep-hole blasting scheme integrates theoretical analysis, numerical optimization and field testing to achieve roof cutting, pressure relief and roadway protection (contribution 8). Weakly cemented sandstone reinforcement is addressed through silica sol grouting, where micro- and nano-pore filling reduces permeability while improving strength and deformation resistance (contribution 9). Rock slope stability is examined through comparative two- and three-dimensional limit-equilibrium analyses, highlighting the influence of spatial discontinuities on stability assessment and anchorage design (contribution 10). These papers connect rock dynamics, soft rock mechanics and support optimization, providing actionable technologies for deformation control and safe excavation while demonstrating how disturbance management and reinforcement design can be integrated into practical rock engineering strategies.
In underground energy, wellbore stability, mining-induced disturbance and cold-region geotechnics, the contributions further broaden the engineering scope of complex rock mechanics. Micro-leakage control in underground salt cavern gas storage is evaluated through different plugging methods, leading to a combined brine crystallization and ultrafine cement grouting solution with low permeability and adequate strength (contribution 11). Coal seam wellbore instability is analyzed by coupling weakness-plane strength criteria with wellbore stress, revealing how bedding, face cleats and butt cleats influence collapse risk (contribution 12). The freezing behavior of unsaturated soils is clarified by examining the effects of boundary conditions, sample scale and soil type on supercooling and freezing temperatures (contribution 13). Dynamic disturbance of thick and hard mining overburden is investigated through physical similarity modeling, revealing fracture–migration behavior and the stabilizing effect of roof pre-splitting (contribution 14). These studies address long-term safety, drilling risk and thermal–hydraulic–mechanical behavior in settings where conventional rock mechanics assumptions are often insufficient, and they further illustrate the importance of adapting rock mechanics concepts to energy storage, resource extraction and cold-region engineering conditions.
3. Closing Remarks
This Special Issue systematically reviews and extends current research on complex rock mechanics problems and their engineering solutions. The collected papers highlight advances in anisotropic rock strength, fracture prediction, water–rock–stress coupling, pore-scale migration, controlled blasting, grouting reinforcement, underground storage tightness, wellbore stability and frozen ground behavior. These topics align closely with the strategic needs of deep resource extraction, safe underground construction, low-carbon energy storage, disaster prevention and intelligent geotechnical infrastructure.
While substantial progress has been achieved, the papers also show that future rock mechanics must move beyond isolated tests or single-field models. The most urgent problems arise from interactions among structural planes, stress redistribution, seepage, chemical reactions, dynamic disturbance, thermal effects and long-term deformation. Addressing these problems will require stronger integration of high-resolution testing, real-time monitoring, multi-field numerical simulation, computer-aided design and engineering feedback systems. In this sense, this Special Issue not only summarizes recent achievements but also points toward a more systematic and solution-oriented framework for rock mechanics.
Overall, the studies gathered here advance both the theoretical and practical frontiers of rock engineering. By linking mechanism identification with design optimization and field application, they provide useful guidance for improving the safety, efficiency and sustainability of tunnels, mines, caverns, reservoirs, slopes, wellbores and other rock engineering systems. The continuing development of complex rock mechanics will depend on this same balance between scientific depth and engineering usability: models must become more faithful to geological reality, and solutions must become more robust under uncertainty.
Author Contributions
Investigation: S.W., R.H. and S.S.; validation: C.Z. and H.Y.; writing—original draft preparation: C.Z. and M.H.; writing—review and editing: R.H. and S.T. All authors have read and agreed to the published version of the manuscript.
Funding
This research was supported by State Key Laboratory of Intelligent Deep Metal Mining and Equipment, Shaoxing University (NO. SXUIDME2601) and International Scientific and Technological Cooperation Base for Geological Disaster Prevention of Zhejiang Province (NO. IBGDP-2022-02).
Informed Consent Statement
Not applicable.
Data Availability Statement
No new data were created or analyzed in this study. Data sharing is not applicable to this article.
Conflicts of Interest
The authors declare no conflicts of interest.
List of Contributions
- Liu, Y.; Yu, Z.; Yin, Y.; Wen, J. Comparative evaluation of presented strength criteria of anisotropic rocks based on triaxial experiments. Appl. Sci. 2025, 15, 5308. https://doi.org/10.3390/app15105308.
- Yang, H.; Song, Y.; Ren, J.; Chen, Y. Research on the self-organized criticality and fracture predictability of sandstone via real-time CT scanning and AE monitoring. Appl. Sci. 2025, 15, 6205. https://doi.org/10.3390/app15116205.
- Zhang, G.; Zhao, C.; Tian, Z.; Xing, J.; Niu, J.; Wang, Z.; Yu, W. Grain-scale heterogeneity, fracture competition, and non-planar propagation in crystalline rocks: Insights from a hydro-mechanical phase-field model. Minerals 2026, 16, 339. https://doi.org/10.3390/min16030339.
- Yu, W.; Duan, G.; Zong, C.; Jin, M.; Chen, Z. Experimental and modeling study of core-scale three-dimensional rough fracture acidic wastewater reaction with carbonate rocks. Appl. Sci. 2025, 15, 5944. https://doi.org/10.3390/app15115944.
- Chen, Y.; Liao, Z.; Xie, D. Study on the influence of rock pore structure on radon diffusion coefficient and permeability based on Quartet Structure Generation Set method. Processes 2026, 14, 634. https://doi.org/10.3390/pr14040634.
- Sun, J.; Zhao, Y.; Wang, J. Ultrasonic transmission experiment research on igneous rocks under dry and saturated conditions. Appl. Sci. 2026, 16, 5869. https://doi.org/10.3390/app16125869.
- Wang, M.; Dong, Q. An experimental study on the expansion rate of blasting cracks in prefabricated grooved concrete under vertical stresses. Appl. Sci. 2025, 15, 9747. https://doi.org/10.3390/app15179747.
- Ren, Z.; Wang, M. Study on deep hole blasting for roof cutting, pressure relief and roadway protection in deep multi-coal seam mining. Appl. Sci. 2025, 15, 10138. https://doi.org/10.3390/app151810138.
- Luo, W.; Liu, H.; Yan, H.; Shan, C.; Zhang, F.; Wang, H. Study on the mechanism of mechanical strength modification in weakly cemented sandstone by silica sol grouting. Processes 2026, 14, 930. https://doi.org/10.3390/pr14060930.
- Zhang, S.; Ran, C.; Xu, J.; Deng, W.; Dong, S.; Mai, Z. Three-dimensional limit-equilibrium comparison and anchorage design of a multi-plane potentially unstable rock block on a hydropower station slope. Appl. Sci. 2026, 16, 9213. https://doi.org/10.3390/app16189213.
- Yin, H.; Ge, X. Experimental study on plugging of micro-leakage interlayer (MLI) in underground salt cavern gas storage (Jintan, China). Processes 2025, 13, 1188. https://doi.org/10.3390/pr13041188.
- Wen, F.; Li, X.; Wang, L.; Shi, J.; Zhao, J.; Yin, T. Study on the instability process of coal seam wellbores based on the coupling of weakness plane strength criterion and wellbore stress. Processes 2026, 14, 1267. https://doi.org/10.3390/pr14081267.
- Sun, J.; Yang, X.; Yue, Y. Experimental research on the supercooling and freezing temperatures of unsaturated soil. Appl. Sci. 2026, 16, 2140. https://doi.org/10.3390/app16042140.
- Xu, H.; Wu, C.; Lai, X.; Cao, J.; Zheng, Z.; Ji, C. Experimental study on the dynamics of the “fracture–migration” effect in overburden under dynamic disturbance. Appl. Sci. 2026, 16, 6532. https://doi.org/10.3390/app16136532.
References
- Singh, M.; Samadhiya, N.K.; Kumar, A.; Kumar, V.; Singh, B. A nonlinear criterion for triaxial strength of inherently anisotropic rocks. Rock Mech. Rock Eng. 2015, 48, 1387–1405. [Google Scholar] [CrossRef] [Scilit]
- Hoek, E. Strength of jointed rock masses. Géotechnique 1983, 33, 187–223. [Google Scholar] [CrossRef] [Scilit]
- Fortsakis, P.; Nikas, K.; Marinos, V.; Marinos, P. Anisotropic behaviour of stratified rock masses in tunnelling. Eng. Geol. 2012, 141–142, 74–83. [Google Scholar] [CrossRef] [Scilit]
- Chang, C.; Haimson, B. A failure criterion for rocks based on true triaxial testing. Rock Mech. Rock Eng. 2012, 45, 1007–1010. [Google Scholar] [CrossRef] [Scilit]
- Lu, W.; Zhu, Z.; He, Y.; Que, X. Strength characteristics and failure mechanism of a columnar jointed rock mass under uniaxial, triaxial, and true triaxial confinement. Rock Mech. Rock Eng. 2021, 54, 2425–2439. [Google Scholar] [CrossRef] [Scilit]
- Ma, W.; Zou, W.; Zhang, J.; Li, G. Prediction of Shear Strength in Anisotropic Structural Planes Considering Size Effects. Designs 2025, 9, 17. [Google Scholar] [CrossRef] [Scilit]
- Gupta, P.; Duarte, C.A. Coupled hydromechanical-fracture simulations of nonplanar three-dimensional hydraulic fracture propagation. Int. J. Numer. Anal. Methods Geomech. 2018, 42, 143–180. [Google Scholar] [CrossRef] [Scilit]
- Fei, F.; Costa, A.; Dolbow, J.E.; Settgast, R.R.; Cusini, M. A phase-field model for hydraulic fracture nucleation and propagation in porous media. Int. J. Numer. Anal. Methods Geomech. 2023, 47, 3065–3089. [Google Scholar] [CrossRef] [Scilit]
- Yang, J.; Tchelepi, H.A.; Kovscek, A.R. Phase-field modeling of rate-dependent fluid-driven fracture initiation and propagation. Int. J. Numer. Anal. Methods Geomech. 2021, 45, 1029–1048. [Google Scholar] [CrossRef] [Scilit]
- Li, H.; Wang, S. Effects of material heterogeneity on 3D rock fracture under triaxial compression: A novel mesoscale phase-field approach. J. Rock Mech. Geotech. Eng. 2026, 18, 4197–4215. [Google Scholar] [CrossRef] [Scilit]
- Zhang, Z.; Ghassemi, A. Simulation of hydraulic fracture propagation near a natural fracture using virtual multidimensional internal bonds. Int. J. Numer. Anal. Methods Geomech. 2011, 35, 480–495. [Google Scholar] [CrossRef] [Scilit]
- Chen, Y.; Mao, H.; Ma, G. A phase transition model for acid dissolution along a rough-walled carbonate fracture. Int. J. Rock Mech. Min. Sci. 2024, 179, 105782. [Google Scholar] [CrossRef] [Scilit]
- Polak, A.; Elsworth, D.; Liu, J.; Grader, A.S. Spontaneous switching of permeability changes in a limestone fracture with net dissolution. Water Resour. Res. 2004, 40, W03502. [Google Scholar] [CrossRef] [Scilit]
- Rodríguez, X.; Barbosa, A.; Cardona, A.; Guimarães, L.; Finkbeiner, T. Impact of carbonate content, rock texture, and roughness on fracture transmissivity and acid-etching patterns in carbonate rocks. Rock Mech. Rock Eng. 2024, 57, 6683–6699. [Google Scholar] [CrossRef] [Scilit]
- Ciantia, M.O.; Castellanza, R.; Crosta, G.B.; Hueckel, T. Effects of mineral suspension and dissolution on strength and compressibility of soft carbonate rocks. Eng. Geol. 2015, 184, 1–18. [Google Scholar] [CrossRef] [Scilit]
- Mourzenko, V.V.; Yousefian, F.; Kolbah, B.; Thovert, J.-F.; Adler, P.M. Solute transport at fracture intersections. Water Resour. Res. 2002, 38, 1000. [Google Scholar] [CrossRef] [Scilit]
- Zou, L.; Cvetkovic, V. Impact of normal stress-induced closure on laboratory-scale solute transport in a natural rock fracture. J. Rock Mech. Geotech. Eng. 2020, 12, 732–741. [Google Scholar] [CrossRef] [Scilit]
- Steele, A.; Reynolds, D.A.; Kueper, B.H.; Lerner, D.N. Field determination of mechanical aperture, entry pressure and relative permeability of fractures using NAPL injection. Géotechnique 2006, 56, 27–38. [Google Scholar] [CrossRef] [Scilit]
- Martínez-Martínez, J.; Fusi, N.; Galiana-Merino, J.J.; Benavente, D.; Crosta, G.B. Ultrasonic and X-ray computed tomography characterization of progressive fracture damage in low-porous carbonate rocks. Eng. Geol. 2016, 200, 47–57. [Google Scholar] [CrossRef] [Scilit]
- Yang, S.; Yu, Q. The role of fluid-rock interactions in permeability behavior of shale with different pore fluids. Int. J. Rock Mech. Min. Sci. 2022, 150, 105023. [Google Scholar] [CrossRef] [Scilit]
- Kamel, K.E.M.; Gerard, P.; Colliat, J.; Massart, T.J. Modelling stress-induced permeability alterations in sandstones using CT scan-based representations of the pore space morphology. Int. J. Rock Mech. Min. Sci. 2022, 150, 104998. [Google Scholar] [CrossRef] [Scilit]
- Yang, H.; Duan, H.; Zhu, J. Experimental study on the role of clay mineral and water saturation in ultrasonic P-wave behaviours across individual filled rock joints. Int. J. Rock Mech. Min. Sci. 2023, 168, 105393. [Google Scholar] [CrossRef] [Scilit]
- Karakul, H.; Ulusay, R. Empirical correlations for predicting strength properties of rocks from P-wave velocity under different degrees of saturation. Rock Mech. Rock Eng. 2013, 46, 981–999. [Google Scholar] [CrossRef] [Scilit]
- Hu, L.; Jia, Y.; Yao, Y.; Leng, Z. Dynamic characteristics and crack propagation of cement-based lining composites under drill-blasting excavation in deep tunnel. Tunn. Undergr. Space Technol. 2026, 168, 107154. [Google Scholar] [CrossRef] [Scilit]
- Yang, J.H.; Lu, W.B.; Jiang, Q.H.; Yao, C.; Zhou, C.B. Frequency comparison of blast-induced vibration per delay for the full-face millisecond delay blasting in underground opening excavation. Tunn. Undergr. Space Technol. 2016, 51, 189–201. [Google Scholar] [CrossRef] [Scilit]
- Fakhimi, A.; Lanari, M. DEM–SPH simulation of rock blasting. Comput. Geotech. 2014, 55, 158–164. [Google Scholar] [CrossRef] [Scilit]
- Gao, J.; Peng, S.; Chen, G.; Fan, H. An extended discontinuous deformation analysis for simulation of grouting reinforcement in a water-rich fractured rock tunnel. J. Rock Mech. Geotech. Eng. 2025, 17, 168–186. [Google Scholar] [CrossRef] [Scilit]
- Zheng, L.; Zhang, D.; Sun, Z.; Lu, S.; Du, Y. Non-Darcy seepage analysis on subsea tunnel in fractured rock mass with grouting reinforcement. Tunn. Undergr. Space Technol. 2026, 168, 107115. [Google Scholar] [CrossRef] [Scilit]
- Ding, W.; Zhou, D.; Chen, X.; Duan, C.; Zhang, Q. Investigation of grouting diffusion in a single rock fracture considering the influences of obstructions. Can. Geotech. J. 2022, 59, 1114–1129. [Google Scholar] [CrossRef] [Scilit]
- Zou, X.; Zhou, T.; Li, G.; Hu, Y.; Deng, B.; Yang, T. Intelligent Inversion Analysis of Surrounding Rock Parameters and Deformation Characteristics of a Water Diversion Surge Shaft. Designs 2024, 8, 116. [Google Scholar] [CrossRef] [Scilit]
- Xin, C.L.; Wang, Z.Z.; Gao, B. Shaking table tests on seismic response and damage mode of tunnel linings in diverse tunnel-void interaction states. Tunn. Undergr. Space Technol. 2018, 77, 295–304. [Google Scholar] [CrossRef] [Scilit]
- Yang, X.; Ming, W.; Gong, W.; Pan, Y.; He, M.; Tao, Z. Support characteristics of flexible negative Poisson’s ratio anchor cable response to blasting impacts. Undergr. Space 2023, 8, 162–180. [Google Scholar] [CrossRef] [Scilit]
- Liu, W.; Li, Y.; Yang, C.; Daemen, J.J.; Yang, Y.; Zhang, G. Permeability characteristics of mudstone cap rock and interlayers in bedded salt formations and tightness assessment for underground gas storage caverns. Eng. Geol. 2015, 193, 212–223. [Google Scholar] [CrossRef] [Scilit]
- Bautmans, P.; Fjaer, E.; Horsrud, P. The effect of weakness patches on wellbore stability in anisotropic media. Int. J. Rock Mech. Min. Sci. 2018, 104, 165–173. [Google Scholar] [CrossRef] [Scilit]
- Li, Y.; Hu, Y.; Zheng, H. Influence of bedding on fracture toughness and failure patterns of anisotropic shale. Eng. Geol. 2024, 341, 107730. [Google Scholar] [CrossRef] [Scilit]
- Williams, P.J. Unfrozen water content of frozen soils and soil moisture suction. Geotechnique 1964, 14, 231–246. [Google Scholar] [CrossRef] [Scilit]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2026 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.