Skip to Content
Applied SciencesApplied Sciences
  • Article
  • Open Access

11 April 2024

15 Pages

Characterization of a Rectangular-Cut Kirigami Pattern for Soft Material Tuning

,
,
and
1
Department of Mechatronics, Tecnológico Nacional de México, Campus Huichapan, Domicilio Conocido Sin número, El Saucillo, Huichapan 42411, Hidalgo, Mexico
2
Centro de Investigación en Ciencia Aplicada y Tecnología Avanzada Unidad Querétaro, Mecatrónica, Instituto Politécnico Nacional, Querétaro 76090, Querétaro, Mexico
3
School of Engineering and Sciences, Tecnologico de Monterrey, Monterrey 64849, Nuevo León, Mexico
4
Department of GMSC, Pprime Institute CNRS, École Nationale Supérieure de Mécanique et d’aérotechnique, University of Poitiers, 86000 Poitiers, France

Abstract

Kirigami is the art of cutting paper to create three-dimensional figures for primarily aesthetic purposes. However, it can also modify the mechanical behavior of the resulting structure. In the literature, kirigami has been applied to modify the material’s structural behavior, such as by changing its elasticity, rigidity, volume, or any other characteristic. This article examines the behavior of a pattern of rectangular kirigami cuts on a thermoplastic polyurethane soft material structure and its influence on the mechanical parameters of the macrostructure. The results demonstrate that rectangular kirigami patterns significantly affect the stiffness of the test specimens, changing from 1635 N/m to 4020 N/m. In elongation, there is a variation from 176.6% to 218% by simply altering the height of the rectangular cut. This enables the adjustment of the soft material structure’s stiffness based on the geometry of the propagating kirigami cuts.
Keywords:
kirigami; soft; stiffness

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.