Next Article in Journal
Hot Forging Die Design Optimization Using FEM Analysis for Near-Net Forming of 18CrNiMo7-6 Steel Pinion Shaft
Previous Article in Journal
Fabrication, Experimental Investigation and Prediction of Wear Behavior of Open-Cell AlSi10Mg-SiC Composite Materials
Previous Article in Special Issue
Effect of Solidification Variables on the Tensile Property of 2.8 wt% C–26 wt% Cr White Iron
 
 
Article

Article Versions Notes

Metals 2023, 13(4), 816; https://doi.org/10.3390/met13040816
Action Date Notes Link
article html file updated 11 September 2025 19:52 CEST Update https://www.mdpi.com/2075-4701/13/4/816/html
article html file updated 6 September 2025 01:39 CEST Update -
article html file updated 22 August 2025 06:10 CEST Update -
article html file updated 23 April 2023 08:42 CEST Update -
article pdf uploaded. 23 April 2023 08:40 CEST Updated version of record https://www.mdpi.com/2075-4701/13/4/816/pdf
article xml uploaded. 23 April 2023 08:40 CEST Update https://www.mdpi.com/2075-4701/13/4/816/xml
article xml file uploaded 23 April 2023 08:40 CEST Update -
article html file updated 21 April 2023 09:59 CEST Original file -
article pdf uploaded. 21 April 2023 09:57 CEST Version of Record https://www.mdpi.com/2075-4701/13/4/816/pdf-vor
article xml uploaded. 21 April 2023 09:57 CEST Update -
article xml file uploaded 21 April 2023 09:57 CEST Original file -
Back to TopTop