Next Article in Journal
Sequential Regularization Method for the Identification of Mold Heat Flux during Continuous Casting Using Inverse Problem Solutions Techniques
Next Article in Special Issue
Regularities of Changes in the Structure of Different Phases of Deformed Zirconium Alloys as a Result of Raising the Annealing Temperature According to Texture Analysis Data
Previous Article in Journal
Microstructural Evolution of a Re-Containing 10% Cr-3Co-3W Steel during Creep at Elevated Temperature
Previous Article in Special Issue
Crystallography of Recrystallization in Al and Cu with Fiber Texture
 
 

Order Article Reprints

Journal: Metals, 2023
Volume: 13
Number: 1684

Article: Life Cycle Assessment of Cold Spray Additive Manufacturing and Conventional Machining of Aluminum Alloy Flange
Authors: by Dileep Kumar, Suresh Palanisamy, Kannoorpatti Krishnan and Md Morshed Alam
Link: https://www.mdpi.com/2075-4701/13/10/1684

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop