Abstract
Background/Objectives: Minimally invasive autopsy methods using endoscopic techniques such as Videoautopsy are one of the new diagnostic tools in forensic science. However, there is still a lack of papers presenting the step-by-step technique for carrying them out. This article presents the protocol for conducting the test, with particular emphasis on technical parameters and rules for performing the procedure. Methods: The technical feasibility study included 15 corpses, which were examined at the Department of Forensic Medicine of the Medical University of Poznań. The tests were carried out in teams of three, consisting of highly qualified medical professionals. Results: The average body temperature at which the procedure was performed was 17.9 °C. The pressure of the produced pneumoperitoneum was in the range of 11–20 mmHg; moreover, it was produced with the use of carbon dioxide, the flow rate of which was in the range of 0.5–2.0 L/min. In each case, the examination was performed primarily in the supine position and included examination of the abdominal cavity and chest. The average procedure time was 37 min. Conclusions: The key to optimal examination is the proper preparation of the corpse. Based on observations, body temperature could influence the formation of the pneumoperitoneum required to obtain an adequate field of view. Further research is needed to develop minimally invasive autopsy techniques.