Skip to Content
MachinesMachines
  • Article
  • Open Access

1 September 2026

24 Pages

Research on the Characteristics of an Electro-Mechanical Direct Drive System for Heavy-Duty Manipulators

,
,
,
,
and
1
Key Lab of Advanced Transducers and Intelligent Control System of Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China
2
State Key Laboratory of Engine and Powertrain System, Weichai Power Co., Ltd., Weifang 261000, China
*
Author to whom correspondence should be addressed.

Abstract

Heavy-duty manipulators are generally driven by hydraulic systems. The control valves in these systems cause substantial throttling losses, resulting in low overall system energy efficiency. To address this problem, this study proposes an electro-mechanical direct drive system (EMDDS) based on an electro-mechanical actuator (EMA) for energy-efficient actuation of heavy-duty manipulators. A supercapacitor energy-management strategy combining current feedforward with voltage feedback is also developed to recover and reuse the gravitational potential energy of the manipulator efficiently. System parameters were selected for the boom of a 6 t excavator, after which a multidisciplinary co-simulation model was established and an experimental prototype was built for validation. The simulation and experimental results show that the proposed system incurs no throttling loss during operation and achieves high drive efficiency. The system recovers and reuses gravitational potential energy with an efficiency of up to 46.4%. Compared with the load-sensing (LS) system, the EMDDS reduces energy consumption over one boom raising and lowering cycle from 42.25 kJ to 16.86 kJ, a reduction of 60.1%. The analysis and experiments provide a basis for developing energy-efficient electric drives and potential-energy recovery technologies for heavy-duty manipulators.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.