Abstract
In this paper, we investigate the family of curvature tensors , under the Schouten–van Kampen connection on Kenmotsu manifolds. Our focus is directed toward evaluating diverse curvature conditions, such as -flatness, --flatness, quasi -flatness, and --flatness for . We show that these curvature restrictions imply that the corresponding Kenmotsu manifolds are Einstein or -Einstein manifolds. Furthermore, we examine the derivation condition , and prove that any Kenmotsu manifold satisfying this condition is an Einstein manifold.
Keywords:
Kenmotsu manifolds; Einstein manifolds; η-Einstein manifolds; MSC:
53D10; 53C25; 53C05; 53C35
1. Introduction
In 1972, Katsuei Kenmotsu pioneered a remarkably important class of almost contact metric spaces, now known as Kenmotsu manifolds [1]. Such a manifold is equipped with an almost contact metric structure , in which the characteristic Reeb vector field is non-Killing. The underlying geometry is governed by the fundamental structural equations and . Due to their intrinsic connection to hyperbolic geometry and warped product spaces, these manifolds have been extensively studied across various disciplines of modern differential geometry [2,3].
Exploring the intricate geometric and topological characteristics of a manifold heavily relies on choosing a suitable linear connection. From this perspective, the Schouten–van Kampen (SvK) connection dates back to 1930, when it was formulated to explore the geometry of non-holonomic manifolds in a systematic manner [4]. The defining feature of this connection is its ability to keep two mutually complementary distributions invariant under parallel transport on a differentiable manifold [5,6]. In 2013, Olszak extended the application of the SvK connection to the domain of almost contact metric structures [7], revealing its essential curvature behavior. Building upon these developments, this connection has become a powerful tool for analyzing various contact metric frameworks, including Sasakian and f-Kenmotsu manifolds [8,9].
Curvature tensors are indispensable geometric objects for characterizing local geometry and gravitational configurations on a manifold. While classical curvature tensors—such as the Weyl conformal, concircular, and conharmonic curvature tensors—provide distinct geometric perspectives, Tripathi and Gupta [10] introduced the generalized T-curvature tensor, which unifies a wide range of well-known curvature tensors, including the Weyl conformal curvature tensor and the family of -curvature tensors . More recently, comparative studies have revealed significant relationships between the Weyl conformal curvature tensors associated with the Levi-Civita and the SvK connections on Kenmotsu manifolds [11].
A prominent direction in contemporary literature involves examining the flatness and derivation conditions of these curvature tensors to classify underlying manifold structures. Imposing vanishing criteria, such as -concircular flatness, -concircular flatness, or quasi-T-flatness, allow researchers to reduce complex structures into simpler Einstein or -Einstein spaces [12,13]. For instance, if the curvature tensor with respect to the SvK connection vanishes identically, the Kenmotsu manifold becomes locally isometric to the hyperbolic space [14]. Furthermore, recent investigations involving , , and Q-curvature tensors have highlighted how specific flatness constraints enforce rigid conditions on the ambient geometric structure [15,16,17]. These ongoing explorations of generalized curvature conditions continue to provide profound insights into the structure of Kenmotsu manifolds [11,18].
However, despite these developments, a systematic investigation of the -curvature tensor family, , associated with the generalized T-curvature tensor under the SvK connection on Kenmotsu manifolds has not yet been carried out. In [11], , , , and curvature tensors are examined and compared under the SvK and the Levi-Civita connections. Moreover, previous studies have mainly focused on individual members of the generalized curvature tensor family or on their counterparts with respect to the Levi-Civita connection. Motivated by these results, the present paper extends this line of research by focusing on the tensors and , two members of the -curvature tensor family, , associated with the generalized T-curvature tensor, and investigating their curvature restrictions as well as their derivation conditions with respect to the entire -curvature tensor family, , under the SvK connection on Kenmotsu manifolds.
The paper is organized as follows. Section 3 focuses on the family of curvature tensors , , with respect to the SvK connection . Various curvature conditions, including -flatness, --flatness, quasi--flatness, and --flatness, are investigated, leading to Einstein and -Einstein characterizations of Kenmotsu manifolds. Section 4 deals with the derivation condition , under which Einstein characterizations are obtained. The obtained Einstein and -Einstein characterizations demonstrate that the considered curvature restrictions impose strong restrictions on the Ricci tensor of Kenmotsu manifolds. In particular, the Einstein condition indicates that the Ricci tensor is completely determined by the metric, whereas the -Einstein condition allows the Ricci tensor to be decomposed into a metric component and an additional component in the direction of the structure vector field . Therefore, the investigated curvature conditions reveal significant geometric restrictions arising from the Schouten–van Kampen connection.
2. Preliminaries
Let M denote a smooth manifold of dimension . An almost contact metric structure on M is specified by a quadruplet , where represents a -type tensor field, stands for the characteristic vector field, is a 1-form, and g signifies a Riemannian metric on M satisfying the conditions
for any vector field , along with the requirements
Furthermore, the Riemannian metric g satisfies
As an immediate consequence of these structural definitions, the following relations hold
for all . Under these circumstances, g is a compatible Riemannian metric with respect to the almost contact structure on [3,19].
An almost contact metric manifold is classified as an almost Kenmotsu manifold provided that the relations
are satisfied, where represents the fundamental 2-form.
More precisely, following the geometric criteria given in [3], an almost Kenmotsu manifold reduces to a Kenmotsu manifold if the condition
holds for any , where ∇ denotes the Levi-Civita connection associated with g.
On a Kenmotsu manifold M, the identities regarding the Levi-Civita connection ∇, the Riemannian curvature tensor R, and the Ricci operator S satisfy the following standard identities [1,20,21]
Here Q is the type Ricci operator which is intrinsically related to the Ricci tensor through the metric via . It is worth noting that the Reeb vector field plays a distinguished role in the curvature structure of Kenmotsu manifolds. Indeed, relation (12) shows that is an eigenvector of the Ricci operator corresponding to the eigenvalue . This property further emphasizes the geometric significance of the Reeb vector field in Kenmotsu manifolds.
Furthermore, by exploiting the compatibility of the Kenmotsu structure with the tensor fields, the Ricci tensor under the action of the structure tensor satisfies the subsequent property
An -Einstein structure on a Kenmotsu manifold M is characterized by the Ricci tensor expansion
where are smooth functions on M. Specifying instantly gives an Einstein structure [1,22].
In our subsequent computations, we utilize the following fundamental trace identities derived on a -dimensional Kenmotsu manifold with respect to the local orthonormal frame [3]
Throughout the paper, geometric objects associated with the Schouten–van Kampen connection are distinguished by a tilde, such as , , , , and , whereas the classical notations without a tilde refer to the conventional Levi-Civita connection. Following [7], the connection is related to the connection ∇ via
By substituting (7) and (8) into (22), we immediately have
Setting in (23) and taking into account (7), one easily finds
The curvature operators and R are conventionally given by
Then, a direct calculation using (23) leads to the relation
By contracting (27) over a local orthonormal frame, the Ricci tensor is given by
Equivalently, the corresponding Ricci operator satisfies the equation
Finally, by taking the trace of the Ricci operator , the scalar curvature is obtained as
Apart from the well-known Riemannian curvature tensor, several alternative types of curvature tensors exist, such as the Weyl conformal, conharmonic, and concircular curvature tensors, each providing distinct geometric characteristics. Let R, S, Q and r denote the Riemannian curvature tensor, the Ricci tensor, the Ricci operator, and the scalar curvature, respectively. The generalized -curvature tensor is defined by
where are smooth functions on M [10].
3. -Curvature Tensor Family on Kenmotsu Manifolds with Flatness Properties of and
In this section, we introduce the -curvature tensor family on Kenmotsu manifolds under the Schouten-van Kampen connection, where each tensor is denoted by for . We then investigate their flatness properties, with a particular emphasis on the cases and . Specifically, we examine the geometric consequences associated with several notions of flatness, namely -flat, --flat, quasi -flat, and --flat structures for .
Among the special cases of the generalized -curvature tensor mentioned in (31), we consider the family of -curvature tensors , obtained by setting , choosing exactly two nonzero coefficients from the set , each equal to , and setting all remaining coefficients, including , equal to zero.
In this case, we write
to denote the family of curvature tensors corresponding to the ordered coefficient tuples
where the correspond respectively to the classical curvature tensors , , , , and , while the corresponding ordered coefficient tuples are explicitly listed in Table 1. Here, the configurations corresponding to , , , , , and are adopted from [23], whereas those corresponding to and – are obtained from [24] and [25], respectively.
Table 1.
The ordered 6-tuples defining the -curvature tensors.
Definition 1.
The -curvature tensor family is defined by
for all , where , and denote the curvature tensor, the Ricci tensor, and the Ricci operator of , respectively. Moreover, are the ordered 6-tuples given in Table 1 for .
Substituting Equations (27)–(29) into Equation (32) yields the -curvature tensor family in terms of ∇ on M, obtained as
The explicit forms of the -curvature tensors in Equation (33) are listed below. Although these expressions are obtained directly by substituting the corresponding ordered 6-tuples given in Table 1 into Equation (33), they are presented explicitly for the convenience of the subsequent computations.
Using Equations (4) and (9)–(12), together with straightforward computations, we obtain the action of the -curvature tensors when one or more arguments are . As a representative example,
Then, using Equations (4), (9)–(12), we obtain the simplified form
The remaining identities follow from analogous computations and are stated in the following lemma.
Lemma 1.
Let ξ be the characteristic vector field. Then, the following identities hold:
Definition 2.
A Kenmotsu manifold M is said to be:
- -flat for if
- ξ--flat for if
- quasi -flat for if
- ϕ--flat for if
for all .
In the following theorems, we investigate the -flatness conditions introduced above for .
Theorem 1.
The -flatness condition on a Kenmotsu manifold M implies the Einstein character of M [11].
Theorem 2.
The -flatness condition on a Kenmotsu manifold M implies the Einstein character of M.
Proof.
We consider a -flat Kenmotsu manifold M, that is , by List 1 in Definition 2. Consequently, it follows from (41) that the curvature tensor satisfies
Setting in (51), and using (10), we obtain
Using (4) and (12), and applying to both sides of (52), we get
Therefore, M has an Einstein characteristic. □
Theorem 3.
The -flatness condition on a Kenmotsu manifold M implies the Einstein character of M.
Proof.
Let M be -flat. Then, for all , which follows from List 2 in Definition 2. Substituting into Equation (46), we obtain
Taking the inner product of both sides of (53) with an arbitrary vector field , we get
Setting in the resulting equation, and using , together with (4) and (12), we obtain
Thus, M is an Einstein manifold, as required. □
The -flatness condition is only considered for , since vanishes identically in the case of . Consequently, the -flatness condition is automatically satisfied and does not lead to any additional Einstein or -Einstein characterization.
The proofs of the following curvature characterizations are based on a common computational strategy. We evaluate the corresponding curvature conditions with respect to suitable -adapted orthonormal frames and take traces over the contact distribution. By using the fundamental identities of Kenmotsu manifolds, together with the relations involving the Ricci operator and the Reeb vector field , the obtained tensorial equations are reduced to algebraic conditions on the Ricci tensor. In this way, the coefficients in the decomposition
are determined, which leads to the Einstein and -Einstein characterizations established below.
Theorem 4.
The quasi -flatness condition on a Kenmotsu manifold M implies the η-Einstein character of M.
Proof.
Let M be quasi -flat. Then, by (38), we have
By List 3 in Definition 2, it follows that
Taking the trace with respect to the local orthonormal frame, we obtain
Using (3), (16), (18), and (19), we derive
Rearranging the terms yields
Comparing the above equation with (14), we obtain
Consequently, M admits an -Einstein metric. □
Theorem 5.
The quasi -flatness condition on a Kenmotsu manifold M implies the η-Einstein character of M.
Proof.
Let M be quasi -flat. Combining (41) with List 3 in Definition 2, we have
Thus taking the trace with respect to the local orthonormal frame, we obtain
By virtue of the relations (15), (16), and (21), together with the definition of Ricci operator Q, given by , we evaluate,
which means
Comparing the above equation with (14), we obtain
Hence, an -Einstein metric is induced on M. □
Theorem 6.
The ϕ--flatness condition on a Kenmotsu manifold M implies the η-Einstein character of M.
Proof.
Let M be --flat. Then by (38) and List 4 in Definition 2, we have
Thus, for the local orthonormal frame of M, setting , we get
Using (19), (20) and the relation , we derive
Now using (3) and (13), we obtain
or equivalently
Comparing the above equation with (14), we obtain
This yields an -Einstein metric on M, concluding the proof. □
Theorem 7.
The ϕ--flatness condition on a Kenmotsu manifold M implies the Einstein character of M.
Proof.
Assume that M is a --flat Kenmotsu manifold. Then, from (41) and List 4 in Definition 2, we get
Now, for a local orthonormal frame of M, setting , we have
Using (15), (18), (20), (21), and the relation , we obtain
Applying (3) and (13), it follows that
Hence, an Einstein metric is induced on M, as required. □
4. Induced Einstein Structures via and Curvature Derivations
The main objective of this section is to analyze how the conditions and , where characterize the underlying geometry of Kenmotsu manifolds. The subsequent theorems provide the necessary and sufficient conditions for for , to hold on M. To maintain conciseness, the curvature tensors are investigated in distinct groups based on the similarity of their proof methods. The grouping is determined by the common reduction steps appearing in the corresponding computations. The proofs within each group follow the same general procedure involving suitable choices of vector fields associated with , taking a g-inner product when necessary, and using the fundamental identities of Kenmotsu manifolds.
Following the standard notion of tensor derivations introduced in [26,27,28,29], the action of a -type tensor on another -type tensor on M is defined by
Theorem 8.
For -curvature tensor on a Kenmotsu manifold M, satisfying for is equivalent to M being an Einstein manifold.
Proof.
Suppose that . Setting , , and choosing in (55) we get
for any , , , , . Substituting into (46), and into (48) and (49), and combining these equations with (56), we obtain
Again, using (48) with , (46) and (47) with , together with (4) and (12), and setting in (57), we derive
Next, setting , we arrive at the following quadratic relation for the Ricci operator Q:
Since the Ricci operator Q is self-adjoint with respect to the Riemannian metric g, the operator is also self-adjoint. Moreover, since a self-adjoint nilpotent operator on a real inner-product space must vanish, the relation implies . Hence, we obtain , which gives Thus, M is an Einstein manifold, completing the proof.
In the converse direction, assume that M is Einstein with . Then . Consequently (34) and (38) yield
Substituting the above relation into (55) and applying (46) with in the cases and , we deduce that .
The other cases can be obtained through the same computational sequence by taking for instead of . Thus, the proof is complete. □
Theorem 9.
For -curvature tensor on a Kenmotsu manifold M, satisfying for , 6, 11, 12 is equivalent to M being an Einstein manifold.
Proof.
Suppose that . Setting , , and choosing in (55), we get
for any , , , , . Substituting into (46), and into (48) and (49), and combining these equations with (58), we obtain
Again, using (48) with , (46), (47) and (50) with , together with (4), (12), and setting in (59), we derive
Next, taking the inner product of both sides of (60) with , we get
or equivalently
Thus, the Equation (61) yields the quadratic relation for the Ricci operator Q:
Solving the above equation yields . Consequently, . Hence, M is indeed an Einstein manifold.
For the converse case, assume that M is an Einstein Kenmotsu manifold satisfying , so that . Substituting these expressions for S and Q into (38) and (39), combining the resulting identities with (55), and applying (46) with in the cases and , we obtain .
The other cases can be obtained through the same computational sequence by taking for , 11, 12 instead of . Thus, the proof is complete. □
Theorem 10.
For -curvature tensor on a Kenmotsu manifold M, satisfying for , 9 is equivalent to M being an Einstein manifold.
Proof.
Suppose that . Setting , , and choosing in (55) we get
for any , , , , . Substituting into (48), and into (48) and (49), and combining these equations with (62), we obtain
Again, using (48) and (49) with , (47) and (48) with , together with (4), (12), and setting in (63), we derive
Next, taking the inner product of both sides of (64) with , we get
or equivalently
Thus, the Equation (65) yields the quadratic relation for the Ricci operator Q
Solving the above equation yields , which implies . Thus, M is an Einstein manifold, as required.
For the converse statement, suppose that M is an Einstein Kenmotsu manifold satisfying , so that . Substituting these relations into the definitions of (38) and (42) and subsequently into (55), and applying (46) for and with , we conclude that .
The other case can be obtained through the same computational sequence by taking instead of . Thus, the proof is complete. □
Theorem 11.
For -curvature tensor on a Kenmotsu manifold M, satisfying for 1, 3, 4, 6, 8, 9, 11, 12 is equivalent to M being an Einstein manifold.
Proof.
Suppose that . Setting , , and choosing in (55) we get
for any , , , , . Substituting into (49), and into (46), and combining these equations with (66), we obtain
Again, using (49) with , (46), (47), and (50) with , together with (4), (12), and setting in (67), we derive
Next, taking the inner product of both sides of (68) with , we get
or equivalently
Thus, the Equation (69) yields the quadratic relation for the Ricci operator Q:
From the above equation, we obtain , which in turn implies . Therefore, M is an Einstein manifold, as required.
For the converse case, let M be an Einstein Kenmotsu manifold satisfying , so that . Inserting these relations into the definitions of (41) and (44) and then employing the resulting expressions in (55), we apply (46) with for and . Consequently, .
The other cases can be obtained through the same computational sequence by taking for instead of . Thus, the proof is complete. □
Theorem 12.
For -curvature tensor on a Kenmotsu manifold M, satisfying for is equivalent to M being an Einstein manifold.
Proof.
Suppose that . Setting , , and choosing in (55) we get
for any , , , , . Substituting into (49), and into (46), and combining these equations with (70), we obtain
Again, using (49) with , (49), (47) and (50) with , together with (4), (12), and setting in (71), we derive
Next, setting , we arrive at the following quadratic relation for the Ricci operator Q:
The above equation leads to , which implies . Consequently, M reduces to an Einstein manifold.
In the converse direction, assume that M is an Einstein Kenmotsu manifold with , and hence . Substituting these relations for S and Q into (41) and (43), and employing the resulting expressions in (55), we apply (46) with for and . Consequently, we arrive at .
The other case can be obtained through the same computational sequence by taking instead of . Thus, the proof is complete. □
Remark 1.
Following the same computational scheme as in the preceding theorems for , , and , together with (2), (4), (9)–(12), and (55), the resulting equations reduce to identities, independently of the position of the structure vector field ξ among . Hence, no nontrivial Ricci operator relation or curvature restriction is obtained. Consequently, these cases do not impose any additional restriction on the geometry of the manifold, and therefore no analogous geometric characterization can be derived.
Example 1.
The following three-dimensional Kenmotsu manifold was also considered in [11]. Let
be the three-dimensional manifold with the standard coordinates in . The linearly independent vector fields on M are defined by
Define a Riemannian metric g on M by
Since
the set forms an orthonormal frame.
Let η and ϕ be the 1-form and -tensor field, respectively, given by
for any vector field on M. Then we have
showing that is an almost-contact metric manifold, where . The fundamental form Φ is defined by
Computing for the basis vectors
is obtained. Hence, . Differentiating gives
so M is a Kenmotsu manifold, since and .
The Lie brackets of the vector fields are
The Levi-Civita connection ∇ satisfies
The non-zero components of the Riemann tensor in the orthonormal frame are
All other components vanish. Consequently, the components of the Ricci tensor S are
This implies
From
we conclude
Specifically,
Since , we have . Thus the -curvature tensor is given by
As , evaluating the components with respect to the orthonormal frame , using together with the curvature components of the above Kenmotsu manifold, we obtain
Therefore, the manifold is -flat.
Moreover, since
the manifold is an Einstein manifold.
Example 2.
Using the same Kenmotsu manifold introduced in Example 1, we now examine the -flatness condition.
Since , we have . Moreover, we know that
Hence, the -curvature tensor is given by
Using
and evaluating for all possible choices of , we obtain
Therefore, the manifold is -flat.
5. Conclusions
In this paper, we have detailed the geometric structure and classification of Kenmotsu manifolds by explicitly focusing on the curvature tensor family () under the connection . Based on our comprehensive analytical derivations, we have established how various flatness and derivation-type algebraic constraints force the underlying manifold to admit specific geometric profiles.
The principal findings of this family-based investigation can be summarized through the distinct behaviors of the and curvature operators:
- The total flatness condition for both tensors forces the underlying structure to be an Einstein manifold.
- The partial -flatness condition is meaningful only for and ensures an Einstein metric, whereas for , it does not yield a definite geometric reduction.
- Regarding weaker constraints, the quasi-flatness condition for both tensors leads to an Einstein manifold, while the -flatness condition induces an -Einstein character for and an Einstein structure for .
- For and , the vanishing of the derivation condition forces the manifold to be an Einstein space in all scenarios, with the sole exceptions of the pairs which do not provide a geometric reduction.
These classifications reveal the algebraic behavior of generalized curvature tensors under a non-symmetric connection. For future research, this systematic methodology can be extended to study different curvature tensor families on nearly cosymplectic or trans-Sasakian manifolds.
Funding
This research received no external funding.
Data Availability Statement
No new data were created or analyzed in this study. Data sharing is not applicable to this article.
Conflicts of Interest
The author declares no conflicts of interest.
References
- Kenmotsu, K. A class of almost contact Riemannian manifolds. Tohoku Math. J. 1972, 24, 93–103. [Google Scholar] [CrossRef] [Scilit]
- Yano, K.; Kon, M. Structures on Manifolds; Series in Pure Mathematics; World Scientific Publishing Co.: Singapore, 1984; Volume 3. [Google Scholar]
- Blair, D.E. Contact Manifolds in Riemannian Geometry; Lecture Notes in Mathematics; Springer-Verlag: Berlin/Heidelberg, Germany; New York, NY, USA, 1976. [Google Scholar]
- Schouten, J.A.; Van Kampen, E.R. Zur Einbettungs-und Krmmungs-theorie nichtholonomer Gebilde. Math. Ann. 1930, 103, 752–783. [Google Scholar] [CrossRef] [Scilit]
- Bejancu, A.; Farran, H.R. Foliations and Geometric Structures; Springer Science and Business Media: Berlin/Heidelberg, Germany, 2006. [Google Scholar]
- Ianus, S. Some almost product structures on manifolds with linear connection. Kodai Math. Semin. Rep. 1971, 23, 305–310. [Google Scholar] [CrossRef] [Scilit]
- Olszak, Z. The Schouten-van Kampen affine connection adapted to an almost (para) contact metric structure. Publ. l’Institut Math. 2013, 94, 31–42. [Google Scholar] [CrossRef] [Scilit]
- Yıldız, A. f-Kenmotsu manifolds with the Schouten-van Kampen connection. Publ. l’Institut Math. 2017, 102, 93–105. [Google Scholar]
- Nagaraja, H.G.; Kiran Kumar, D.L. Kenmotsu manifolds admitting Schouten-van Kampen Connection. Facta Univ. Ser. Math. Inform. 2019, 34, 23–34. [Google Scholar] [CrossRef] [Scilit]
- Tripathi, M.M.; Gupta, P. T-curvature Tensor On a Semi Riemannian Manifold. J. Adv. Math. Stud. 2011, 4, 117–129. [Google Scholar]
- Can, Z.; Tekin, P. Comparative Results for αi-Curvature Conditions on Kenmotsu Manifolds via the Levi-Civita and Schouten–van Kampen Connections. Symmetry 2026, 18, 473. [Google Scholar] [CrossRef] [Scilit]
- Ünal, İ.; Altın, M.; Pandey, S. A Classification of N(κ)-contact Metric Manifolds with T-curvature Tensor. Turk. J. Math. Comput. Sci. 2025, 17, 550–561. [Google Scholar] [CrossRef] [Scilit]
- Uygun, P.; Dirik, S.; Atceken, M. Some curvature characterizations on Kenmotsu metric spaces. GJOM 2022, 13, 78–86. [Google Scholar] [CrossRef] [Scilit]
- Kiran Kumar, D.L.; Nagaraja, H.G.; Naveenkumar, S.H. Some Curvature Properties of Kenmotsu Manifolds with Schouten–van Kampen Connection. Bull. Transilv. Univ. Brasov Ser. III Math. Inform. Phys. 2019, 12, 351–364. [Google Scholar]
- Singh, R.N.; Pandey, S.K.; Pandey, G. On W2-curvature tensor in a Kenmotsu manifold. Tamsui Oxf. J. Math. Sci. 2013, 29, 129–141. [Google Scholar]
- Uygun, P.; Atceken, M.; Dirik, S. On Kenmotsu Metric Spaces Satisfying Some Conditions on the W1-Curvature Tensor. Filomat 2022, 36, 1603–1613. [Google Scholar] [CrossRef] [Scilit]
- Yıldırım, M.; Beyendi, S.; Ayar, G.; Aktan, N. Geometry of Kenmotsu Manifolds via Q-Curvature Tensor and Schouten–Van Kampen Connection. Axioms 2025, 14, 498. [Google Scholar] [CrossRef] [Scilit]
- Uygun, P.; Atceken, M. On Kenmotsu metric spaces satisfying some conditions on the W7-curvature tensor. Malaya J. Mat. 2023, 11, 447–456. [Google Scholar] [CrossRef] [Scilit]
- Mishra, R.S. Structure on a Differentiable Manifold and Their Applications; Chandrama Prakashan: Prayagraj, India, 1984. [Google Scholar]
- De, U.C.; Pathak, G. On 3-dimensional Kenmotsu manifolds. Indian J. Pure Appl. Math. 2004, 35, 159–165. [Google Scholar]
- De, U.C.; Yıldız, A.; Yalınız, F. On ϕ-reccurrent Kenmotsu manifolds. Turk. J. Math. 2009, 33, 17–25. [Google Scholar]
- Sasaki, S. Almost Contact Manifolds, Part III; Lecture Notes; Mathematical Institute, Tohoku University: Sendai, Japan, 1968. [Google Scholar]
- Pokhariyal, G.P.; Mishra, R.S. Curvature tensors and their relativistic significance. Yokohama Math. J. 1970, 18, 105–108. [Google Scholar]
- Pokhariyal, G.P.; Mishra, R.S. Curvature tensors and their relativistic significance II. Yokohama Math. J. 1971, 19, 97–103. [Google Scholar]
- Pokhariyal, G.P. Relativistic signicance of curvature tensors. Int. J. Math. Math. Sci. 1982, 5, 133–139. [Google Scholar]
- Kobayashi, S.; Nomizu, K. Foundations of Differential Geometry; Interscience Publishers: New York, NY, USA, 1963; Volume 1, Chapter II, Sections 3–5. [Google Scholar]
- Spivak, M. A Comprehensive Introduction to Differential Geometry; Publish or Perish: Houston, TX, USA, 1979; Volume 2, Chapter 7. [Google Scholar]
- Besse, A.L. Einstein Manifolds; Springer-Verlag: Berlin/Heidelberg, Germany, 1987; Chapter 1. [Google Scholar]
- Lee, J.M. Riemannian Manifolds: An Introduction to Curvature; Springer: New York, NY, USA, 1997; Chapter 6. [Google Scholar]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2026 by the author. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.