Next Article in Journal
Flow-Line-Reducing Tetrahedral Metal Effect Pigments for Injection Molding: A Yield-Rate-Improved Particle Manufacturing Method Based on Soft UVImprint Lithography
Next Article in Special Issue
Mechanical Uniaxial Compression of 3D-Printed Non-Periodic ASA Lattice Structures Using Semi-Controlled Design Models
Previous Article in Journal
Rheology of Dental Photopolymers for SLA/DLP/MSLA 3D Printing
Previous Article in Special Issue
Three-Dimensionally Printed Microstructured Hydrophobic Surfaces: Morphology and Wettability
 
 
Article

Article Versions Notes

Polymers 2025, 17(19), 2707; https://doi.org/10.3390/polym17192707
Action Date Notes Link
article xml file uploaded 8 October 2025 13:32 CEST Original file -
article xml uploaded. 8 October 2025 13:32 CEST Update https://www.mdpi.com/2073-4360/17/19/2707/xml
article pdf uploaded. 8 October 2025 13:32 CEST Version of Record https://www.mdpi.com/2073-4360/17/19/2707/pdf
article html file updated 8 October 2025 13:34 CEST Original file https://www.mdpi.com/2073-4360/17/19/2707/html
Back to TopTop