Next Article in Journal
A Numerical Model to Predict the Relaxation Phenomena in Thermoset Polymers and Their Effects on Residual Stress during Curing—Part I: A Theoretical Formulation and Numerical Evaluation of Relaxation Phenomena
Next Article in Special Issue
Cycle-Based Control of Injection Moulding Process in Presence of Material Dual Sourcing Using Mass Feedback
Previous Article in Journal
A “2-in-1” Bioanalytical System Based on Nanocomposite Conductive Polymers for Early Detection of Surface Water Pollution
Previous Article in Special Issue
Expansion Injection Molding Process Using Clamping Force for Melt Compression
 
 

Order Article Reprints

Journal: Polymers, 2024
Volume: 16
Number: 1432

Article: Development and Validation of a 1D Dynamic Model of an Injection Moulding Process and Design of a Model-Based Nozzle Pressure Controller
Authors: by Rasmus Aagaard Hertz, Ole Therkelsen, Søren Kristiansen, Jesper Kjærsgaard Christensen, Frederik Agervig Hansson and Lasse Schmidt
Link: https://www.mdpi.com/2073-4360/16/10/1432

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop