Skip to Content
You are currently on the new version of our website. Access the old version .
PolymersPolymers
  • Review
  • Open Access

25 August 2023

23 Pages

Research Progress in Boron-Modified Phenolic Resin and Its Composites

,
,
,
,
,
and
1
Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing 100191, China
2
CAS Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China
*
Authors to whom correspondence should be addressed.

Abstract

As one of the most successful modified phenolic resins, boron-modified phenolic resin (BPF) has excellent heat resistance and ablative resistance, good mechanical and wear resistance, and flame retardancy. BPF and its composites can be widely used in areas such as aerospace, weapons and equipment, automobile brakes, and fire retardants. In this review, the current state of development of BPF and its composites is presented and discussed. After introducing various methods to synthesize BPF, functionalization of BPF is briefly summarized. Particular emphasis is placed on general methods used to fabricate BPF-based composites and the heat resistance, ablative resistance, mechanical property, wear resistance, flame retardancy, and water resistance of BPF-based composites. Finally, the challenges of this research area are summarized and its future outlook is prospected.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.