Order Article Reprints

Abu Bakar AA, Zainuddin MZ, Abdullah SM, Tamchek N, Mohd Noor IS, Alauddin MS, Alforidi A, Mohd Ghazali MI. The 3D Printability and Mechanical Properties of Polyhydroxybutyrate (PHB) as Additives in Urethane Dimethacrylate (UDMA) Blends Polymer for Medical Application. Polymers. 2022; 14(21):4518. https://doi.org/10.3390/polym14214518

Abu Bakar, Ahmad Adnan, Muhammad Zulhilmi Zainuddin, Shahino Mah Abdullah, Nizam Tamchek, Ikhwan Syafiq Mohd Noor, Muhammad Syafiq Alauddin, Ahmad Alforidi, and Mohd Ifwat Mohd Ghazali. 2022. "The 3D Printability and Mechanical Properties of Polyhydroxybutyrate (PHB) as Additives in Urethane Dimethacrylate (UDMA) Blends Polymer for Medical Application" Polymers 14, no. 21: 4518. https://doi.org/10.3390/polym14214518

Abu Bakar, A. A., Zainuddin, M. Z., Abdullah, S. M., Tamchek, N., Mohd Noor, I. S., Alauddin, M. S., Alforidi, A., & Mohd Ghazali, M. I. (2022). The 3D Printability and Mechanical Properties of Polyhydroxybutyrate (PHB) as Additives in Urethane Dimethacrylate (UDMA) Blends Polymer for Medical Application. Polymers, 14(21), 4518. https://doi.org/10.3390/polym14214518