Next Article in Journal
Biomimetic Rose Petal Structures Obtained Using UV-Nanoimprint Lithography
Next Article in Special Issue
Natural Ageing of PLA Filaments, Can It Be Frozen?
Previous Article in Journal
Investigation on the Potential Use of Polypropylene Mesh for the Reinforcement of Heat-Polymerized PMMA Denture Base Resin
Previous Article in Special Issue
Assessment of Destructive and Nondestructive Analysis for GGBS Based Geopolymer Concrete and Its Statistical Analysis
 
 
Article
Peer-Review Record

Computational Modeling of Polymer Matrix Based Textile Composites

Polymers 2022, 14(16), 3301; https://doi.org/10.3390/polym14163301
by Michal Šejnoha 1, Jan Vorel 1, Soňa Valentová 1, Blanka Tomková 2, Jana Novotná 2 and Guido Marseglia 3,4,*
Reviewer 1:
Reviewer 2:
Reviewer 3: Anonymous
Polymers 2022, 14(16), 3301; https://doi.org/10.3390/polym14163301
Submission received: 12 July 2022 / Revised: 8 August 2022 / Accepted: 9 August 2022 / Published: 13 August 2022
(This article belongs to the Special Issue Advances in the Mechanical Behavior of Polymeric Materials)

Round 1

Reviewer 1 Report

The computational modeling of polymer matrix is a very fundamental and important research area. In this manuscript, author use several model to simulate the textile reinforced epoxy resin composite. They remedied the accurate of FEM model and proved the simulation could replace the actual laboratory measurements in a field of plastic matrix. Then it was confirmed that the multi-scale textile-reinforced plastic composites could be predicted for a macroscopic response of tension and shearing measurements. 

The manuscript is well organized and written. The improved FEM model can be useful in application of virtual measurement of plastic composites. I suggest this work can be published in the journal as current state.

Author Response

the authors would like to thank the reviewers for their valuable comments to improve the paper.

The attached .pdf file highlights the changes made.

Reviewer 2 Report

A very interesting topic of multiscale analysis of multiscale analysis of a plain weave reinforced composite made of basalt fabrics bonded to a epoxy resin was presented. The chosen fabric is made of basalt fibres, which have an increasing application and are therefore very topical. The modelling methodology was presented using various numerical simulations. This is valuable data for all those involved in the development of new materials. This makes the paper very interesting. Although it is a purely computational study that should be validated experimentally, the paper is original and very valuable.

The paper is conceptually well done and no changes are needed.

The recommendation to the editorial board is to publish the paper.

 

Author Response

the authors would like to thank the reviewers for their valuable comments to improve the paper.

The attached .pdf file highlights the changes made.

Author Response File: Author Response.pdf

Reviewer 3 Report

Dear Authors,

Please find the enclosed file.

Comments for author File: Comments.pdf

Author Response

the authors would like to thank the reviewers for their valuable comments to improve the paper.

The attached .pdf file highlights the changes made.

Author Response File: Author Response.pdf

Back to TopTop