Polymers, Volume 13, Issue 23

This research is devoted to the fabrication of polyvinyl alcohol (PVOH) based n-type thermoelectric composites with innovative hybrid bismuth selenide-multiwalled carbon nanotube (Bi₂Se₃-MWCNT) fillers for application in flexible thermoelectric devic...

Heat-assisted plasma (HAP) treatment using He gas is known to improve the adhesive-bonding and adhesive-free adhesion properties of polytetrafluoroethylene (PTFE). In this study, we investigated the effects of He and Ar gaseous species on the HAP-tre...

Cross-laminated timber (CLT) elements are becoming increasingly popular in multi-storey timber-based structures, which have long been built in many different countries. Various challenges are connected with constructions of this type. One such challe...

Alginate is a common agent used for microencapsulation; however, the formed capsule is easily damaged. Therefore, alginate requires blending with other biopolymers to reduce capsule vulnerability. Whey protein is one polymer that can be incorporated...

Gelatin was immobilized selectively on the amide groups-modified bottom of a trench array of a photoresist template with 2 μm resolution by the ethyl(dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide reaction. The gelatin-immobilized line arr...

Many revolutionary approaches are on the way pertaining to the high occurrence of tooth decay, which is an enduring challenge in the field of preventive dentistry. However, an ideal dental care material has yet to be fully developed. With this aim, t...

The high price of petroleum, overconsumption of plastic products, recent climate change regulations, the lack of landfill spaces in addition to the ever-growing population are considered the driving forces for introducing sustainable biodegradable so...

Cardiovascular Diseases (CVDs) such as atherosclerosis, where inflammation occurs in the blood vessel wall, are one of the major causes of death worldwide. Mesenchymal Stem Cells (MSCs)-based treatment coupled with nanoparticles is considered to be a...

Mixing soil with waste tire rubber granules or fibres is a practical and promising solution to the problem of global scrap tire pollution. Before successful applications, the mechanical behaviour of the soil–rubber mixture must be thoroughly in...

This research focused on the development of biomaterials based on cassava starch and corn starch and on the effect of the incorporation of polycaprolactone (PCL) on the thermal and thermomechanical properties of the blends. The results indicated part...

Biocompatible smart interfaces play a crucial role in biomedical or tissue engineering applications, where their ability to actively change their conformation or physico-chemical properties permits finely tuning their surface attributes. Polyelectrol...

Polydimethylsiloxane (PDMS) is one of the most promising elastomers due its remarkable proprieties such as good thermal stability, biocompatibility, corrosion resistance, flexibility, low cost, ease of use, chemically inertia, hyperplastic characteri...

Wood–plastic composites (WPC) with good mechanical and physical properties are desirable products for manufacturers and customers, and interfacial bond strength is one of the most critical factors affecting WPC performance. To verify that a hig...

The development of edible films and coatings in the food packaging industry presents one of the modern strategies for protecting food products and ensuring their freshness and quality during their shelf lives. The application of microbial polysacchar...

Fused filament fabrication is a technology of additive manufacturing that uses molten thermoplastics for building parts. Due to the convenient shape of the raw material, a simple filament, the market offers a great variety of materials from simple to...

Novel stiff, tough, highly transparent and ultra-extensible self-assembled nanocomposite elastomers based on poly(2-methoxyethylacrylate) (polyMEA) were synthesized. The materials are physically crosslinked by small in-situ-formed silica nanospheres,...

Dual transient networks were prepared by mixing highly charged long wormlike micelles of surfactants with polysaccharide chains of hydroxypropyl guar above the entanglement concentration for each of the components. The wormlike micelles were composed...

Organic–inorganic xerogel networks were synthesized from bacterial poly (3-hydroxybutyrate) (PHB) for potential biomedical applications. Since silane-based networks usually demonstrate increased biocompatibility and mechanical properties, silox...

Having the advantage of eco-friendly decomposition, bioplastics could be used to replace petroleum-based plastics. In particular, poly(3-hydroxybutyrate) (PHB) is one of the most commercialized bioplastics, however, necessitating the introduction of...

Hydrogels are spatially organized hydrophilic polymeric systems that exhibit unique features in hydrated conditions. Among the hydrogel family, composite hydrogels are a special class that are defined as filler-containing systems with some tailor-mad...

Metal–polymer nanocomposite polyvinyltriazole–silver nanoparticles were obtained using one-pot synthesis in irradiated aqueous solutions of 1-vinyl-1,2,4-triazole (VT) and silver ions. Gel permeation chromatography data show that upon rad...

This study identifies the importance of reducing press times by employing high-frequency pressing of spruce-laminated timber bound with sustainable casein adhesives. Spruce lamellas with dimensions of 12 × 10 × 75 cm were bonded into five...

Due to the little information related to surface processing and conditioning of resin matrix ceramic materials previous glazing, the main purpose of this in vitro study was to investigate the effect of different surface treatments on the surface morp...

We studied the kinetics of swelling in high-χ lamellar-forming poly(styrene)-block- poly(lactic acid) (PS-b-PLA) block copolymer (BCP) by varying the heating rate and monitoring the solvent vapour pressure and the substrate temperature in situ du...

The performance of concrete structures deteriorates over time. Thus, improving their performance using fiber-reinforced polymers (FRPs), PS strands, and various strengthening methods is important. Reinforced concrete (RC) and prestressed concrete (PS...

The synthesize of solid polymer electrolyte (SPE) based on polyethylene oxide (PEO), NaClO₄ and nano-SiO₂ was carried out by solution cast technique. Nano-SiO₂ was synthesized from sugarcane bagasse using sol-gel method. FTIR analysis was carried out...

Modification and functionalization of polymer surface properties is desired in numerous applications, and a standard technique is a treatment with non-equilibrium gaseous plasma. Fluorinated polymers exhibit specific properties and are regarded as di...

As artificial marble is abundant and widely used in residential and commercial fields, the resource utilization of artificial marble wastes (AMWs) has become extremely important in order to protect the environment. In this paper, polybutylene terepht...

This study examined the uniformity of illuminance field distributions of light guide plates (LGPs). First, the authors designed microstructural patterns on the surface of an LGP. Then, a mold of the LGP with the optimal microstructural design was fab...

One of the ways to enhance the yield of bacterial cellulose (BC) is by using dynamic aeration and different-type bioreactors because the microbial producers are strict aerobes. But in this case, the BC quality tends to worsen. Here we have combined s...

Moisture is detrimental to the performance of epoxy resin material for electrical equipment in long-term operation and insulation. Therefore, moisture absorption is one of the critical indicators for insulation of the material. However, some relevant...

We found the logical way to prove the existence of the mechanism that maintains the rates of biodegradation and regeneration of cervical spine cartilage. We demonstrate, that after we restore access to arterial blood flow through cervical vertebral a...

Cigarette smoking is a popular habit that has negative health consequences for populations. In this study, we developed a gallic acid-containing, gelatin-based nonwoven mat with photodegradation and photoindication functions. This could react with si...

Ni_0.5Zn_0.5Fe₂O₄ nanofibers with an average diameter of 133.56 ± 12.73 nm were fabricated by electrospinning and calcination. According to our thermogravimetric—differential thermal analysis and X-ray diffraction results, the calcination...

Producing parts by 3D printing based on the material extrusion process determines the formation of air gaps within layers even at full infill density, while external pores can appear between adjacent layers making prints permeable. For the 3D-printed...

Malva parviflora L. is an edible and medicinal herb containing mucilaginous cells in its leaves. Mucilage obtained from M. parviflora leaves (MLM) was extracted in distilled water (1:10 w/v) at 70 °C followed by precipitation with alcohol. Prelim...

In this study, polycaprolactone (PCL)- and poly(acrylic acid) (PAA)-based electrospun nanofibers were prepared for the carriers of antimicrobials and designed composite nanofiber mats for chronic wound care. The PCL- and PAA-based electrospun nanofib...

Bamboo scrimber is one of the most popular engineering bamboo composites, owing to its excellent physical and mechanical properties. In order to investigate the influence of grain direction on the compression properties and failure mechanism of bambo...

In sucrose/citric acid based wood adhesive, the detailed bonding mechanism has still been unknown. Here, we investigated the detailed chemical structures of this adhesive wood (Japanese cedar)-based molding by using heteronuclear single quantum coher...

Lung cancer has a very low survival rate, and non-small cell lung cancer comprises around 85% of all types of lung cancers. Fluvastatin (FLV) has demonstrated the apoptosis and suppression of tumor-cell proliferation against lung cancer cells in vitr...

Cyclodextrins (CDs) are a good alternative to reduce or enhance different biomolecule characteristics and have demonstrated great results in food science. However, CDs present intrinsic limitations that can be solved by derivative synthesis. This rev...

Polyurethane (PU) coatings are often applied on high added value technical textiles. Key factor to success of PU coatings is its versatility and durability. Up to today most PU textile coatings are solvent-based or water-based. Recent advances are ma...

The aim of the study was to compare microleakage and fracture loads of all ceramic crowns luted with conventional polymer resins and polymeric bioactive cements and to assess the color stability of polymeric bioactive cements. Seventy-five extracted...

In this paper, it is reported that a metal-free and non-conjugated polymer, MA-PEG 8000-BADGE (MP8B), exhibits an antireflective property and substrate-dependent photoluminescence (SDP). MP8B was constructed from maleic anhydride, poly(ethylene glyco...

Volatile organic compounds pollute the environment and pose a serious threat to human health due to their toxicity, mutagenicity, and carcinogenicity. In this context, it is highly desirable to fabricate high-performance poly (dimethylsiloxane) (PDMS...

Self-repairing microcapsules prepared with melamine formaldehyde (MF) resin as wall material and shellac and waterborne coating as core material were added to waterborne coating to prepare a self-repairing coating. In order to explore the effect of t...

Seed coating containing fertilizer nutrients and plant growth biostimulants is an innovative technique for precision agriculture. Nutrient delivery can also be conducted through multilayer seed coating. For this purpose, sodium alginate with NPK, whi...

This work aimed to prepare ulluco starch (US)/chitosan (Ch) edible films and evaluate the effect of the concentration of US on their physicochemical properties. The use of edible films is a means of adding value to the ulluco crop and evaluating the...

The astonishing outbreak of SARS-CoV-2 coronavirus, known as COVID-19, has attracted numerous research interests, particularly regarding fabricating antimicrobial surface coatings. This initiative is aimed at overcoming and minimizing viral and bacte...

Cost-effective and environmentally responsible ways of carbon fiber-reinforced composite (CFRP) recycling are increasingly important, owing to the rapidly increasing use of these materials in many industries such as the aerospace, automotive and ener...