Next Article in Journal
New Aspects on the Direct Solid State Polycondensation (DSSP) of Aliphatic Nylon Salts: The Case of Hexamethylene Diammonium Dodecanoate
Next Article in Special Issue
Mechanical Properties of Flexible TPU-Based 3D Printed Lattice Structures: Role of Lattice Cut Direction and Architecture
Previous Article in Journal
Investigation of the Thermal and Hydrolytic Degradation of Polylactide during Autoclave Foaming
Previous Article in Special Issue
Effects of Printing Parameters on the Fatigue Behaviour of 3D-Printed ABS under Dynamic Thermo-Mechanical Loads
 
 
Review

Article Versions Notes

Polymers 2021, 13(16), 2623; https://doi.org/10.3390/polym13162623
Action Date Notes Link
article html file updated 25 December 2025 19:50 CET Update https://www.mdpi.com/2073-4360/13/16/2623/html
article html file updated 6 September 2025 22:30 CEST Update -
article html file updated 22 August 2025 01:14 CEST Update -
article html file updated 27 July 2022 08:35 CEST Update -
article html file updated 10 August 2021 09:57 CEST Original file -
article pdf uploaded. 10 August 2021 09:54 CEST Updated version of record https://www.mdpi.com/2073-4360/13/16/2623/pdf
article xml uploaded. 10 August 2021 09:54 CEST Update https://www.mdpi.com/2073-4360/13/16/2623/xml
article xml file uploaded 10 August 2021 09:54 CEST Original file -
article pdf uploaded. 6 August 2021 15:38 CEST Version of Record https://www.mdpi.com/2073-4360/13/16/2623/pdf-vor
Back to TopTop