Next Article in Journal
Effect of a Powder Mould in the Post-Process Thermal Treatment of ABS Parts Manufactured with FDM Technology
Next Article in Special Issue
Impact Response of Aramid Fabric-Reinforced Polybenzoxazine/Urethane Composites Containing Multiwalled Carbon Nanotubes Used as Support Panel in Hard Armor
Previous Article in Journal
Development and Analysis of the Physicochemical and Mechanical Properties of Diorite-Reinforced Epoxy Composites
Previous Article in Special Issue
Polyether Single and Double Crystalline Blends and the Effect of Lithium Salt on Their Crystallinity and Ionic Conductivity
 
 

Order Article Reprints

Journal: Polymers, 2021
Volume: 13
Number: 2423

Article: Comprehensive Characterization of Polymeric Composites Reinforced with Silica Microparticles Using Leftover Materials of Fused Filament Fabrication 3D Printing
Authors: by Waleed Ahmed, Sidra Siraj and Ali H. Al-Marzouqi
Link: https://www.mdpi.com/2073-4360/13/15/2423

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop