Skip to Content
PolymersPolymers
  • Article
  • Open Access

4 September 2020

16 Pages

Thermo-Responsive Shape Memory Effect and Conversion of Porous Structure in a Polyvinyl Chloride Foam

,
,
and
State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, 29 Yudao Street, Nanjing 210016, China
*
Author to whom correspondence should be addressed.
This article belongs to the Special Issue Thermoresponsive Polymers

Abstract

In this paper, a thermo-responsive shape memory effect in a polyvinyl chloride thermoset foam is characterized. Excellent shape recovery performance is observed in foam samples programmed both at room temperature and above their transition temperature. The conversion of porous structures in the foam from closed-cell to open-cell after a shape memory effect cycle is revealed via a series of specially designed oil-dripping experiments and optical images of the micro pores. Programming the strain higher than 20% results in an apparent increase in open-cell level, whereas programming temperatures have almost no influence.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.