Skip to Content
MicromachinesMicromachines
  • Article
  • Open Access

29 May 2026

17 Pages

Controlled-Atmosphere Corrosion Engineering Toward NiFe-LDH Enabling High-Performance Alkaline Seawater Electrolysis with Long-Term Stability

,
,
,
,
,
,
,
and
1
Zhejiang Key Laboratory of Pollution Control for Port–Petrochemical Industry, Marine Science and Technology College, Zhejiang Ocean University, Zhoushan 316022, China
2
National Engineering Research Center for Marine Aquaculture, Zhejiang Ocean University, Zhoushan 316022, China
3
School of Chemistry and Chemical Engineering, Anhui Provincial Key Laboratory of Advanced Catalysis and Energy Materials, Anhui Key Laboratory of Optoelectronic Magnetic Functional Complex and Nano Complex, Anqing Normal University, Anqing 246011, China
4
School of Integrated Circuits (School of Microelectronics), Northwestern Polytechnical University, Xi’an 710129, China

Abstract

Electrochemical water splitting stands as a feasible approach for sustainable hydrogen production, but its industrial implementation is restricted by sluggish oxygen evolution reaction (OER) kinetics and excessive dependence on freshwater resources. As a widely existing alternative, seawater contains a high concentration of chloride ions (Cl−), which give rise to serious electrode corrosion and catalyst deactivation, bringing great challenges to actual electrolysis applications. Herein, we report a facile room-temperature two-step soaking strategy to fabricate sulfur-modified NiFe layered double hydroxide (S-NiFe-LDH) catalysts for efficient OER in both alkaline freshwater and seawater electrolytes. The introduction of sulfur not only optimizes the electronic structure of NiFe-LDH to strengthen intrinsic catalytic activity and speed up charge transfer, but also promotes the formation of a Cl−-resistant layer, thus significantly improving corrosion resistance. In addition, DFT calculations show sulfur modification in NiFe layered double hydroxide upshifts the O 2p-band center to activate lattice oxygen, switches the oxygen evolution reaction pathway to the lattice oxygen mechanism with reduced thermodynamic barriers, and realizes the selective adsorption of OH− over Cl−. As a result, the as-prepared S-NiFe-LDH catalyst exhibits exceptional OER performance, requiring overpotentials (η) of 250, 270, and 290 mV to reach current densities of 50, 100, and 200 mA·cm−2 in 1 M KOH, respectively, with a Tafel slope of 22.3 mV·dec−1. Moreover, it maintains remarkable stability for more than 200 h in alkaline seawater electrolytes and achieves nearly 100% Faradaic efficiency for water splitting, effectively avoiding the parasitic chlorine evolution reaction (CER). This work provides a scalable and energy-efficient synthetic route for designing advanced non-noble metal catalysts, paving the way for industrial-scale hydrogen production from seawater.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.