Previous Article in Journal
Global Navigation Satellite Systems (GNSS) in Climate Change Research: A Comprehensive Review
Previous Article in Special Issue
Impact of Vegetation and Soil Moisture on the Detection of Buried Landmines Using GPR
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
This is an early access version, the complete PDF, HTML, and XML versions will be available soon.
Article

High-Resolution 3D GPR Imaging of Concealed Surface Masonry in Pompeian Walls: Performance Analysis of Contact and Non-Contact Surveys

Department of Civil and Environmental Engineering, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milan, Italy
*
Author to whom correspondence should be addressed.
Remote Sens. 2026, 18(17), 3002; https://doi.org/10.3390/rs18173002
Submission received: 30 June 2026 / Revised: 18 August 2026 / Accepted: 31 August 2026 / Published: 3 September 2026

Abstract

Antenna–surface coupling is a key factor controlling the quality of Ground Penetrating Radar (GPR) data, governing the efficiency of electromagnetic energy transmission into the investigated medium. In cultural heritage applications, however, direct antenna contact is often not feasible due to the fragility of decorated surfaces, requiring non-contact configurations whose impact on high-resolution imaging remains insufficiently quantified. This study investigates the effect of antenna coupling on high-resolution 3D GPR imaging of concealed masonry at Pompeii through electromagnetic simulations and a controlled in situ comparison of contact and non-contact acquisitions on a plastered wall. The experimental campaign was conducted at the House of the Red Walls (VIII, 5, 37) on an opus mixtum masonry, selected as the most geometrically and electromagnetically challenging test case among regular Pompeian construction techniques. A 3 GHz antenna was employed, and three acquisition configurations were analysed: direct contact, and non-contact setups with antenna elevations of 3 cm and 5 cm. The results show that even moderate antenna elevation significantly reduces coupling efficiency at the air–plaster interface, leading to a progressive degradation of imaging performance. While the overall masonry arrangement remains recoverable in all configurations, increasing stand-off distance reduces the detectability of individual units and degrades geometric accuracy, with vertical mortar joints being the most affected elements. These findings demonstrate that, given the combined electromagnetic and geometric characteristics of the construction materials used at Pompeii, near-contact GPR acquisition is required for reliable imaging of masonry arrangement under the investigated conditions, highlighting the critical role of antenna coupling in high-frequency GPR surveys of fragile architectural surfaces.
Keywords: Pompeii; GPR; non-destructive tests; non-contact survey; masonry arrangement Pompeii; GPR; non-destructive tests; non-contact survey; masonry arrangement

Share and Cite

MDPI and ACS Style

Donzelli, S.; Petrini, L.; Lualdi, M. High-Resolution 3D GPR Imaging of Concealed Surface Masonry in Pompeian Walls: Performance Analysis of Contact and Non-Contact Surveys. Remote Sens. 2026, 18, 3002. https://doi.org/10.3390/rs18173002

AMA Style

Donzelli S, Petrini L, Lualdi M. High-Resolution 3D GPR Imaging of Concealed Surface Masonry in Pompeian Walls: Performance Analysis of Contact and Non-Contact Surveys. Remote Sensing. 2026; 18(17):3002. https://doi.org/10.3390/rs18173002

Chicago/Turabian Style

Donzelli, Sara, Lorenza Petrini, and Maurizio Lualdi. 2026. "High-Resolution 3D GPR Imaging of Concealed Surface Masonry in Pompeian Walls: Performance Analysis of Contact and Non-Contact Surveys" Remote Sensing 18, no. 17: 3002. https://doi.org/10.3390/rs18173002

APA Style

Donzelli, S., Petrini, L., & Lualdi, M. (2026). High-Resolution 3D GPR Imaging of Concealed Surface Masonry in Pompeian Walls: Performance Analysis of Contact and Non-Contact Surveys. Remote Sensing, 18(17), 3002. https://doi.org/10.3390/rs18173002

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Article metric data becomes available approximately 24 hours after publication online.
Back to TopTop