Skip to Content
SustainabilitySustainability
  • Article
  • Open Access

27 November 2021

17 Pages

Static Load Test and Numerical Analysis of Influencing Factors of the Ultimate Bearing Capacity of PHC Pipe Piles in Multilayer Soil

,
,
,
and
1
School of Civil Engineering, Northeast Forestry University, Harbin 150040, China
2
Heilongjiang Provincial Longjian Road and Bridge the First Engineering Co., Ltd., Harbin 150028, China
3
School of Transportation Science and Engineering, Harbin Institute of Technology, Harbin 150090, China
4
Heilongjiang Transportation Investment Engineering Construction Co., Ltd., Harbin 150040, China

Abstract

Prestressed high-strength concrete (PHC) pipe piles have been widely used in engineering fields in recent years; however, the influencing factors of their ultimate bearing capacity (UBC) in multilayer soil need to be further studied. In this paper, a static load test (SLT) and numerical analysis are performed to obtain the load transfer and key UBC factors of pipe piles. The results show that the UBC of the test pile is mainly provided by the pile shaft resistance (PSR), but the pile tip resistance (PTR) cannot be ignored. Many factors can change the UBC of pipe piles, but their effects are different. The UBC of the pipe pile is linearly related to the friction coefficient and the outer-to-inner diameter ratio. Changes in the pile length make the UBC increase sharply. Low temperatures can produce freezing stress at the pile–soil interface. The effect of changing the Young modulus of pile tip soil is relatively small.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.