As a natural, renewable, and low-carbon biomass material, wood, especially bamboo, has found increasingly broad applications in fields such as construction, furniture, and energy. It is a critical resource for achieving sustainable development. However, the inherent properties of wood—such as hygroscopicity, anisotropy, and biodegradability—limit its direct application in high-performance scenarios. Therefore, processing and modification have become key technological pathways to improve wood’s performance, extend its service life, and expand its application boundaries.
This Special Issue focuses on “Wood Processing, Modification, and Performance Research”, features multidisciplinary perspectives, and systematically explores the structural characteristics, modification methods, performance evaluation, and application potential of bamboo and wood. Topics covered include the multi-scale characterization of wood structure, chemical/physical/mechanical modification techniques, the impact of environmental factors on performance, and the engineering applications of wood in fields such as construction and furniture. By showcasing cutting-edge research findings, this Special Issue promotes the translation of wood science from basic research to industrial applications, supporting the development of green materials.
Based on their content, the articles in this Special Issue can be divided into four main themes: the multi-scale characterization and performance modeling of wood structures; degradation mechanisms and protection strategies for archeological wood; the structural characteristics and functional modification of bamboo; and the durability and outdoor performance evaluation of wood coatings.
1. Multi-Scale Characterization of Wood Structure and Performance Modeling
Wood’s multi-scale structural characteristics are key in determining its macroscopic performance, with the structure–performance relationship being a core issue in wood science. With advances in non-destructive testing technologies and computational simulations, researchers can now analyze the porosity, the anisotropy, and their effects on wood’s thermal and mechanical properties at the micro-scale [1,2,3]. Two studies in this Special Issue showcase the innovative use of X-ray computed tomography (XCT) for wood structure characterization and performance modeling, focusing on thermal performance simulation and quality evaluation.
Zhao et al. [4], using oak as the study material, combined 3D XCT imaging with thermal conductivity simulation to explore the relationship between wood porosity and thermal conductivity. The team extracted structural parameters such as porosity, pore size distribution, and fractal dimension for earlywood, latewood, and overall samples and then simulated the thermal conductivity in different directions. The results closely matched experimental values from the transient plane source method (errors of 1.14%, 0.53%, and 9.3%, respectively), confirming the reliability of XCT simulation. The study revealed significant differences in porosity (59.41% for earlywood vs. 26.4% for latewood) and average pore size (10.56 μm for earlywood vs. 9.53 μm for latewood), directly contributing to the anisotropy of thermal conductivity. Latewood showed a strong correlation (R2 = 0.96) between porosity and fractal dimension, whereas earlywood exhibited a weaker correlation. This highlights how wood’s ordered structure impacts its thermal conductivity, providing theoretical support for optimizing wood drying processes and advancing digital wood science.
Gejdoš et al. [5], from an industrial perspective, compared traditional visual grading to CT image-based grading for evaluating oak log quality. Analyzing 125 logs, they found that CT-based grading detected hidden internal defects (e.g., decay, knots, cracks, heart checks), downgrading 33% of the logs and upgrading more than 10% due to precise measurement. Economic analysis showed CT-based grading was 3769 euros (approximately 30.16 euros/m3) less valuable than traditional visual grading, mainly due to better defect identification. The study emphasizes the role of non-destructive testing technologies in enhancing processing precision, optimizing resource allocation, and improving economic efficiency [6,7,8]. Furthermore, it showed that while visual assessment could detect defects, it lacked millimeter-level accuracy, which XCT combined with 3D reconstruction provided.
Together, these studies demonstrate XCT’s broad potential in wood science. Zhao et al. [4] focused on structure–performance relationships, providing foundational support for wood modification, while Gejdoš et al. [5] emphasized precise evaluation in industrial settings, offering a pathway for better resource utilization. Both studies contribute to advancing wood science, from experience to quantification, and from macroscopic to multi-scale analysis, laying a solid foundation for wood processing and modification innovations.
2. Degradation Mechanisms and Protection Strategies for Archeological Wood
Wood, as a biomass material, undergoes complex physical, chemical, and biological degradation processes when buried for long periods. The study of archeological wood preservation is crucial not only in conserving cultural heritage but also in understanding ancient wood processing techniques, resource utilization, and human–environment interactions [9]. The article by Xu et al. [10] in this Special Issue systematically reveals the degradation mechanisms of archeological wood under the interaction of multiple factors, providing scientific guidance for heritage preservation.
The team identified a well-preserved wooden artifact from a well dating back to the Western Zhou period at the Shen Duntou site in Fanchang, Anhui Province, as Firmiana simplex L. (Chinese parasol tree) using wood anatomical methods. This discovery is significant because Firmiana simplex, a local species, is known for its good water resistance and suitable mechanical properties (Janka hardness of approximately 2300 N). This suggests that the Western Zhou people had a rudimentary understanding of material properties when selecting wood for well construction, reflecting early human adaptability and technological wisdom.
Further degradation analysis revealed severe damage to the archeological wood, with a maximum moisture content of 1100% ± 85%, 9.2 times higher than modern wood, indicating drastic expansion of the wood’s porosity due to hydrolysis. X-ray diffraction analysis showed a sharp drop in cellulose crystallinity from 52.8% to 16.1%, indicating destruction of the cellulose molecular chain’s hydrogen-bond network. Fourier transform infrared spectroscopy confirmed that hemicellulose was almost completely degraded, while lignin was relatively enriched, showing typical anaerobic hydrolysis characteristics. Scanning electron microscopy revealed multi-scale damage, including thinning of vessel walls, disappearance of pit membranes, and delamination of cell walls, consistent with previous studies on water-soaked archeological wood [11,12].
This study’s innovation lies in integrating various analytical techniques to explore wood degradation from macro to molecular levels. The research emphasizes that consolidating materials must consider permeability and compatibility. Materials with low surface tension, such as hydroxyethyl methacrylate or nano-SiO2 dispersions, are more suitable for protecting severely degraded wood. This finding offers crucial guidance for preserving water-soaked archeological wood.
Xu et al.’s research not only enhances our understanding of ancient wood processing and environmental adaptability but also demonstrates the application potential of wood science methods in archeology. By revealing wood’s structural evolution during long-term burial, this study promotes interdisciplinary exploration in cultural heritage preservation and wood degradation, extending wood science research from modern applications to historical contexts.
3. Structural Characteristics and Functional Modification of Bamboo
Bamboo, a rapidly growing and highly renewable biomass material, is increasingly used in construction, furniture, and decoration [13]. However, its low permeability severely limits the efficiency and uniformity of processing methods such as drying, preservation, dyeing, and impregnation, posing a significant challenge to its high-value utilization. This Special Issue features two review articles offering crucial theoretical support and practical guidance on the functional modification of bamboo, focusing on bamboo permeability and the development of bamboo whip resources.
Su et al. [14] reviewed 126 articles from 1997 to 2024 and constructed a multi-dimensional analytical framework for bamboo permeability. The study delves into bamboo’s multi-scale structural characteristics, explaining how microscopic structures such as vessels, sieve tubes, perforation plates, pit membranes, and bamboo nodes affect its permeability [15,16]. Vessels, the primary channels for longitudinal transport, influence liquid transfer efficiency based on their diameter (ranging from 10 to 200 μm) and distribution. The sieve tubes, responsible for nutrient transport, are denser in the middle internodes. The type (simple vs. ladder-net mixed perforation plates) and the inclination angle (0° to 83°) of perforation plates significantly impact water flow resistance. Pit membranes, critical for lateral transport, determine lateral permeability through their morphology and distribution. Moreover, the arrangement of vascular bundles at bamboo nodes redirects and splits longitudinal flow. Su et al. propose a composite transport model that combines vertical capillary rise and horizontal diffusion, integrating capillary action, diffusion, and viscous resistance into a unified framework. The review also compares direct methods (gravimetric method, microscopy, tracer element analysis, fluorescence imaging) and indirect methods (mercury intrusion porosimetry, gas adsorption, Micro-CT, FIB-SEM) for testing bamboo permeability. Modification strategies, including chemical (acid–base treatment, ethanol extraction), physical (thermal treatment, microwave, ultrasound, vacuum freeze-drying), and biological (enzymatic hydrolysis, biomimetic modification), are evaluated based on effectiveness, environmental impact, and energy consumption. This review provides a systematic theoretical guide for optimizing bamboo modification processes, enhancing its high-value application in engineering materials.
Su et al. [17] then shift focus to bamboo whips, a previously underutilized underground stem resource. Bamboo whips, the vegetative reproductive organs of bamboo, are crucial for nutrient acquisition, water transport, and asexual reproduction in ecosystems [18]. In bamboo forest management, many aging bamboo whips are discarded as waste, leading to resource wastage. This study systematically summarizes the anatomical structure, chemical composition, physical and mechanical properties, and current applications of bamboo whips, proposing a three-dimensional analysis framework based on “age-species-function”. Bamboo whip fibers (0.6 to 0.9 mm in length) are significantly shorter than bamboo culms but have thicker cell walls, making them denser and more robust. Lignin content increases with age, which enhances bamboo whips’ hardness and resistance to decay. There are significant chemical composition differences between bamboo species, with purple bamboo whips containing 31.6% lignin, demonstrating excellent durability [19]. Compared to bamboo culms, bamboo whips have stronger end-face hydrophobicity and better short-term dimensional stability (reducing deformation by 50% to 70%) but show higher water absorption after prolonged immersion. Bamboo whips have applications in crafts, organic fertilizers, and composite materials, with potential for high-friction functional materials and bio-based composites.
Together, these studies advance bamboo science by providing a systematic theoretical framework for addressing bamboo permeability [16] and expanding the utilization of bamboo whips [17]. These findings support green initiatives, such as replacing plastics with bamboo, by offering a solid scientific foundation for maximizing bamboo’s resource potential.
4. Durability and Outdoor Performance Evaluation of Wood Coatings
The durability of wood in outdoor construction is significantly influenced by the effectiveness of surface coatings, which not only enhance esthetics but also block moisture, resist UV radiation, and prevent biological degradation. However, the long-term performance of coatings in real-world environments often differs from laboratory test results [20]. Kwon et al. [21] evaluate the complex relationship between coating formulation, environmental factors, and long-term performance in 55 commercial wood coatings.
The coatings were classified by solvent type (water-based/oil-based) and pigment opacity (semi-transparent/opaque), and their water resistance, color stability, and anti-fungal performance were tested in both laboratory and outdoor conditions. Laboratory tests revealed that only eight coatings met the ASTM D4446 standard [22] for anti-swelling efficiency (ASE > 60%), while 35 coatings had ASE below 30%. Oil-based coatings generally exhibited better initial water resistance compared to water-based coatings. However, correlation analysis showed no significant relationship between ASE and anti-fungal performance (brown-rot fungi r = 0.11, white-rot fungi r = 0.02). After 12 weeks of fungal testing, all samples showed a moisture content between 47% and 115%, promoting fungal growth. This suggests that water resistance alone cannot prevent fungal decay, and fungicide type and dosage are crucial for anti-fungal efficacy. Coatings containing IPBC, dichlorofluoromethylamine, zirconium salts, and isothiazolinones showed excellent anti-fungal performance (mass loss rate of 0.2% to 4.4%), comparable to ACQ-treated wood. In contrast, coatings without fungicides, despite high ASE, had mass loss rates above 20%.
Field exposure tests over 12 months confirmed discrepancies between laboratory and real-world performance. Trials in Seoul and Jeju showed significant water resistance degradation (over 20%) between 6 and 12 months, suggesting re-coating every year. In Jeju, with higher humidity and precipitation, coatings degraded faster [23]. Opaque coatings with higher pigment content, such as WBO1, showed minimal color change (ΔE < 8), while semi-transparent coatings discolored within three months due to insufficient UV protection.
This study reveals the gap between laboratory tests and real-world performance, emphasizing the need to optimize water resistance, fungicide efficacy, pigment coverage, and environmental adaptability in wood coatings.
5. Conclusions and Outlook
This Special Issue presents cutting-edge research in wood science and engineering, highlighting the importance of multi-scale structural understanding in modifying wood performance. It covers a range of topics, from the porosity–thermal conductivity relationship via XCT imaging to precision improvements in log processing through CT grading, as well as molecular analysis of archeological wood degradation. This Special Issue also explores a multi-dimensional framework for bamboo permeability, the “age–species–function” framework for bamboo whip utilization, and empirical evaluations of wood coatings’ outdoor performance. These studies showcase diverse modification methods aligned with application scenarios, emphasizing the impact of standardized detection methods and environmental adaptability on engineering transformation. The potential of non-mainstream materials such as bamboo whips offers new pathways for a green economy, providing strong theoretical and technical support for industries such as construction and furniture.
Looking ahead, future research should focus on the application of multi-scale modeling and AI in wood performance prediction, developing green low-energy modification technologies, establishing open access wood/bamboo performance databases, and enhancing collaboration between industry, academia, and research institutions. These efforts are designed to accelerate the transition from basic research to engineering applications and promote the sustainable use of wood materials. This Special Issue will inspire interdisciplinary innovation and contribute to global sustainable development goals.
Funding
This research received no external funding.
Acknowledgments
The author would like to thank all the contributors to this Special Issue.
Conflicts of Interest
The author declares no conflicts of interest.
References
- Suleiman, B.; Larfeldt, J.; Leckner, B.; Gustavsson, M. Thermal conductivity and diffusivity of wood. Wood Sci. Technol. 1999, 33, 465–473. [Google Scholar] [CrossRef] [Scilit]
- Hunt, J.F.; Gu, H. Two-dimensional finite element heat transfer model of softwood. Part I. Effective thermal conductivity. Wood Fiber Sci. 2006, 38, 592–598. [Google Scholar]
- Andrä, H.; Dobrovolskij, D.; Engelhardt, M.; Godehardt, M.; Makas, M.; Mercier, C.; Rief, S.; Schladitz, K.; Staub, S.; Trawka, K. Image-based microstructural simulation of thermal conductivity for highly porous wood fiber insulation boards: 3D imaging, microstructure modeling, and numerical simulations for insight into structure–property relation. Wood Sci. Technol. 2023, 57, 5–31. [Google Scholar] [CrossRef] [Scilit]
- Zhao, J.; Chen, B.; Lv, J.; Yi, J.; Yuan, L.; Liu, Y.; Cai, Y.; Chi, X. A Comprehensive Evaluation of Simulating Thermal Conductivity in Oak Wood Using XCT Imaging. Forests 2025, 16, 834. [Google Scholar] [CrossRef] [Scilit]
- Gejdoš, M.; Gergel, T.; Lieskovský, M.; Gracovský, R. Qualitative Assessment of Oak Logs: Traditional Method vs. Computer Tomography. Forests 2025, 16, 918. [Google Scholar] [CrossRef] [Scilit]
- Gergel’, T.; Bucha, T.; Gejdoš, M.; Vyhnáliková, Z. Computed tomography log scanning—High technology for forestry and forest based industry. Cent. Eur. For. J. 2019, 65, 51–59. [Google Scholar]
- Fredriksson, M.; Cool, J.; Duchesne, I.; Belley, D. Knot detection in computed tomography images of partially dried jack pine (Pinus banksiana) and white spruce (Picea glauca) logs from a Nelder type plantation. Can. J. For. Res. 2017, 47, 910–915. [Google Scholar] [CrossRef] [Scilit]
- Beaulieu, J.; Duttileul, P. Applications of computed tomography (CT) scanning technology in forest research: A timely update and review. Can. J. For. Res. 2019, 49, 1173–1188. [Google Scholar] [CrossRef] [Scilit]
- Singh, A.P.; Kim, Y.S.; Chavan, R.R. Advances in Understanding Microbial Deterioration of Buried and Waterlogged Archaeological Woods: A Review. Forests 2022, 13, 394. [Google Scholar] [CrossRef] [Scilit]
- Xu, L.; Yang, W.; Liu, M.; Wang, Z.; Liu, X. Wood Species Identification and Property Evaluation of Archaeological Wood Excavated from J1 at Shenduntou Site, Fanchang, Anhui, China. Forests 2025, 16, 1173. [Google Scholar] [CrossRef] [Scilit]
- Guo, J.; Xiao, L.; Han, L.; Wu, H.; Yang, T.; Wu, S.; Yin, Y. Deterioration of the Cell Wall in Waterlogged Wooden Archaeological Artifacts, 2400 Years Old. IAWA J. 2019, 40, 820–844. [Google Scholar] [CrossRef] [Scilit]
- Zhang, J.; Li, Y.; Ke, D.; Wang, C.; Pan, H.; Chen, K.; Zhang, H. Modified Lignin Nanoparticles as Potential Conservation Materials for Waterlogged Archaeological Wood. ACS Appl. Nano Mater. 2023, 6, 7821–7834. [Google Scholar] [CrossRef] [Scilit]
- Liese, W. The Anatomy of Bamboo Culms; Brill: Berlin, Germany, 1998. [Google Scholar]
- Liu, R.; Zhang, S.; Semple, K.; Lian, C.; Chen, M.; Luo, J.; Yang, F.; Dai, C.; Fei, B. Precise microcasting revealing the connectivity of bamboo pore network. Ind. Crops Prod. 2021, 170, 113787. [Google Scholar]
- Cao, M.; Ren, W.; Zhu, J.; Wang, H.; Guo, J.; Zhang, X.; Yu, Y. Cell wall pore structures of bamboo evaluated using gas adsorption methods. Holzforschung 2022, 76, 754–764. [Google Scholar] [CrossRef] [Scilit]
- Su, N.; Yan, Q.; Li, Y.; Su, W.; Xu, H.; Fang, C. A Comprehensive Review of Bamboo Permeability: Structural Mechanisms, Detection Techniques, and Enhancement Strategies. Forests 2025, 16, 1744. [Google Scholar] [CrossRef] [Scilit]
- Su, N.; Li, Y.; Zhang, C.; Chen, Y.; Xu, H.; Fang, C.; Chen, L. Bamboo Rhizomes: Insights into Structure, Properties, and Utilization. Forests 2026, 17, 6. [Google Scholar] [CrossRef] [Scilit]
- Mohamed, J.; Hamid, H.A.; Nuruddin, A. Anatomical characteristics of Gigantochloa scortechinii bamboo rhizome in relation with hydraulic conductance. BioResources 2019, 14, 9082–9099. [Google Scholar] [CrossRef] [Scilit]
- Su, N.; Li, Y.; Yan, Q.; Zhu, M.; Wang, H.; Lian, C.P.; Su, W.Y.; Xu, H.C. Qualitative and quantitative study of the anatomical characteristics of Phyllostachys edulis rhizome. Wood Sci. Technol. 2025, 60, 5. [Google Scholar] [CrossRef] [Scilit]
- Pánek, M.; Oberhofnerová, E.; Zeidler, A.; Šedivka, P. Efficacy of hydrophobic coatings in protecting oak wood surfaces during accelerated weathering. Coatings 2017, 7, 172. [Google Scholar] [CrossRef] [Scilit]
- Kwon, S.L.; Oh, J.-J.; Yoon, S.-M.; Hwang, W.-J.; Kim, G.-H.; Choi, Y.-S. Performance Evaluation of Exterior Wood Stains Under Laboratory and Field Scale Test: Focus on Water Performance, Color Retention, and Fungal Growth Resistance. Forests 2025, 16, 1834. [Google Scholar]
- ASTM D4446/D4446M-13; Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments. ASTM International: West Conshohocken, PA, USA, 2013.
- Kim, M.J.; Choi, Y.S.; Oh, J.J.; Kim, G.H. Experimental investigation of the humidity effect on wood discoloration by selected mold and stain fungi for a proper conservation of wooden cultural heritages. J. Wood Sci. 2020, 66, 31. [Google Scholar] [CrossRef] [Scilit]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2026 by the author. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.