1. Introduction and Scope
Metallic alloys are widely used in the automotive, aerospace, aeronautical, chemical, and marine industries, where components must meet stringent performance and durability requirements. These applications require materials with adequate mechanical strength, fatigue resistance, and, particularly, corrosion resistance. Corrosion-related degradation remains a major industrial challenge with economic, safety, and logistical consequences. Mechanical strength alone cannot ensure the durability of metallic alloys exposed to aggressive environments. Improving their performance requires optimization of alloy composition and metallurgical processing in addition to effective corrosion-control strategies, including development of protective coatings. Such approaches can extend metallic components’ service lives.
This Special Issue, “Corrosion Electrochemistry and Protection of Metallic Materials”, presents recent research on electrochemical corrosion science, engineering, and technology. It brings together multidisciplinary investigations of metallic materials, emphasizing electrochemical characterization techniques, corrosion mechanisms, and methods for corrosion prevention and protection.
2. Contributions
This Special Issue brings together original research contributions addressing electrochemical corrosion processes and strategies for protecting metallic materials. It comprises ten research articles covering a range of alloys, exposure environments, characterization methods, and protective approaches.
Liu, S., et al. (Contribution 1) systematically investigated the corrosion and stress corrosion cracking (SCC) behavior of L415 pipeline steel in a simulated soil environment representative of the Gannan region in Southern China. Corrosion kinetics were strongly influenced by environmental chemistry: the corrosion rate increased from 0.0505 to 0.1949 mm/year under the combined effects of low pH and high sulfate concentrations [1].
Martinez-Ramos, C., et al. (Contribution 2) investigated the use of hidden Markov models (HMMs) to classify and reconstruct corrosion mechanisms in the aerospace-grade aluminum alloy AA2055 using electrochemical noise (EN) signals. Their findings demonstrate that meaningful signal reconstruction was possible despite variations in signal quality, particularly when datasets contained distinct transient features [2].
Bao, M., et al. (Contribution 3) investigated the corrosion behavior of L245 pipeline steel in chloride-containing solutions with varying thiosulfate (S2O32−) concentrations. Weight-loss measurements at different exposure times showed that thiosulfate promoted localized corrosion and that the corrosion behavior depended on its concentration in the chloride-containing solution [3].
Li, B., et al. (Contribution 4) examined Cu–Sn alloys in 3.5 wt.% NaCl and simulated archaeological soil solutions using electrochemical methods, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Chloride ions played a key role in the formation of detrimental corrosion products, including Cu2(OH)3Cl. Chloride-containing corrosion products also increased the wettability of the rust layers, facilitating penetration by corrosive species and promoting further degradation [4].
Bonfil, D., et al. (Contribution 5) investigated the effect of chlorides on the corrosion behavior of AISI 304 stainless steel and A36 carbon steel in an extract of a hybrid pumice–Portland cement system containing 5 g/L of NaCl, which was used to simulate a chloride-contaminated concrete pore environment. The extract pH decreased from 12.99 to 9.5 after 14 days, indicating an increased corrosion risk for A36 steel, whose open-circuit potential (OCP) was approximately −363 mV. In contrast, stainless steel 304 exhibited passivation behavior, with its OCP shifting to approximately +72 mV [5].
Alontseva, D., et al. (Contribution 6) evaluated pure Ti and Ti6Al4V coatings formed in situ on 316L stainless steel via hot pressing. Corrosion and wear behavior were examined in Hanks’ solution and physiological saline (0.9% NaCl). Both coatings improved corrosion resistance relative to the uncoated 316L substrate, while wet wear tests showed lower friction coefficients in physiological saline solution than in Hanks’ solution [6].
Cieślik, M., et al. (Contribution 7) investigated the influence of mechanical stress on pitting corrosion initiation and the protective properties of passive films on AISI 304L stainless steel. In 3.5% NaCl solution, no initiation of pitting corrosion was observed in specimens loaded within either the elastic or plastic range under the conditions examined [7].
Alvarez-Malpica, J., et al. (Contribution 8) synthesized a long-chain aliphatic amine compound and evaluated its ability to inhibit steel corrosion in a sour saline environment.
At an inhibitor concentration of 20 ppm, no significant change in inhibition efficiency was observed. At 100 ppm, however, the inhibition efficiency exceeded 95% [8].
Stejskal, J., et al. (Contribution 9) investigated iron microparticles coated in situ with polypyrrole during the chemical oxidation of pyrrole with ammonium peroxydisulfate in an aqueous medium. Scanning electron microscopy revealed the coating’s morphology, while Fourier-transform infrared (FTIR) and Raman spectroscopy provided evidence of its molecular structure and coverage. The study also describes morphological differences between microscopic and macroscopic polypyrrole structures [9].
Cabral-Miramontes, J., et al. (Contribution 10) investigated hard-anodized coatings on aluminum alloys 2024-T3 (Al–Cu), 6061-T6 (Al–Mg–Si), and 7075-T6 (Al–Zn) produced using citric- and sulfuric-acid baths at different concentrations. Among the alloys studied, 6061-T6 exhibited the greatest coating thickness and hardness [10].
Author Contributions
Conceptualization, F.A.-C., C.G.-T., R.G.-M. writing—review and editing, F.A.-C., C.G.-T., R.G.-M. All authors have read and agreed to the published version of the manuscript.
Acknowledgments
As Guest Editors of this Special Issue of Materials, we sincerely thank all the authors for their valuable contributions, the reviewers for their careful assessments, and the editorial team for its dedicated support throughout the publication process. We hope that this collection will serve as a useful reference for researchers and practitioners working on corrosion electrochemistry and the protection of metallic materials.
Conflicts of Interest
The authors declare no conflicts of interest.
List of Contributions
- Liu, S.; Liu, M.; Shangguan, Y.; Mei, K.; Zhu, S.; Liu, K.; Liao, R. Role of Environmental Chemistry in Governing the Corrosion and Stress Corrosion Cracking Mechanism of L415 Pipeline Steel in Acidic Soils. Materials 2025, 18, 5492. https://doi.org/10.3390/ma18245492.
- Martinez-Ramos, C.; Gaona-Tiburcio, C.; Estupiñan-López, F.; Cabral-Miramontes, J.; Maldonado-Bandala, E.; Nieves-Mendoza, D.; Baltazar-Zamora, M.A.; Landa-Ruiz, L.; Galvan-Martinez, R.; Almeraya-Calderón, F. Smart Corrosion Monitoring in AA2055 Using Hidden Markov Models and Electrochemical Noise Signal Processing. Materials 2025, 18, 2865. https://doi.org/10.3390/ma18122865.
- Bao, M.; He, Y.; Li, J.; Zhang, L.; Liu, C.; Wang, L.; Wen, Z.; Zhang, X.; Wang, S. Investigation of the Corrosion Behavior of L245 Steel in 3.5 wt.% NaCl Solution with Varying Concentrations of Na2S2O3. Materials 2025, 18, 2270. https://doi.org/10.3390/ma18102270.
- Li, B.; Xia, Q.; Dong, W. Comparative Study of the Corrosive Behaviors of Rust Layers on Bronze Ware in Different Corrosive Environments. Materials 2025, 18, 1359. https://doi.org/10.3390/ma18061359.
- Bonfil, D.; Veleva, L.; Escalante-Garcia, J.I. Stainless Steel 304 and Carbon Mild Steel A36 Activity in Chloride-Containing Hybrid Pumice-Portland Cement Extract Pore Environment. Materials 2025, 18, 1216. https://doi.org/10.3390/ma18061216.
- Alontseva, D.; Yavuz, H.İ.; Azamatov, B.; Khoshnaw, F.; Safarova, Y.; Dogadkin, D.; Avcu, E.; Yamanoglu, R. Improving Corrosion and Wear Resistance of 316L Stainless Steel via In Situ Pure Ti and Ti6Al4V Coatings: Tribocorrosion and Electrochemical Analysis. Materials 2025, 18, 553. https://doi.org/10.3390/ma18030553.
- Cieślik, M.; Orlikowski, J.; Krakowiak, S.; Żakowski, K. Dynamic Electrochemical Impedance Spectroscopy in Galvanostatic Mode as a Tool for Passive Layer State Monitoring in a Chloride Solution Under a Mechanical Load. Materials 2025, 18, 167. https://doi.org/10.3390/ma18010167.
- Alvarez-Malpica, J.; Carrera-Gutiérrez, K.; Chinchillas-Chinchillas, M.; Herrera Zaldivar, M.; Martinez-Garcia, A.; Orozco-Carmona, V.M. Synthesis and Electrochemical Properties of Oleylamine as a Sour Saline Corrosion Inhibitor Under Laminar Flow at 40 °C. Materials 2024, 17, 5284. https://doi.org/10.3390/ma17215284.
- Stejskal, J.; Jurča, M.; Trchová, M.; Prokeš, J.; Křivka, I. In-Situ Coating of Iron with a Conducting Polymer, Polypyrrole, as a Promise for Corrosion Protection. Materials 2024, 17, 4783. https://doi.org/10.3390/ma17194783.
- Cabral-Miramontes, J.; Almeraya-Calderón, F.; Méndez-Ramírez, C.T.; Flores-De los Rios, J.P.; Maldonado-Bandala, E.; Baltazar-Zamora, M.Á.; Nieves-Mendoza, D.; Lara-Banda, M.; Pedraza-Basulto, G.; Gaona-Tiburcio, C. Effect of Citric Acid Hard Anodizing on the Mechanical Properties and Corrosion Resistance of Different Aluminum Alloys. Materials 2024, 17, 4285. https://doi.org/10.3390/ma17174285.
References
- Xu, H.; Li, Y.; Zhou, T.; Lan, F.; Zhang, L. An overview of the oil and gas pipeline safety in China. J. Ind. Saf. 2024, 1, 100003. [Google Scholar] [CrossRef] [Scilit]
- Martínez-Ramos, C.; Olguin-Coca, J.; Lopez-Leon, L.D.; Gaona-Tiburcio, C.; Lara-Banda, M.; Maldonado-Bandala, E.; Castañeda Robles, I.; Jaquez-Muñoz, J.M.; Cabral-Miramontes, J.; Nieves-Mendoza, D.; et al. Electrochemical noise analysis using experi mental chaos theory, power spectral density and Hilbert–Huang transform in anodized aluminum alloys in Tartaric–Phosphoric Sulfuric acid solutions. Metals 2023, 13, 1850. [Google Scholar] [CrossRef] [Scilit]
- Jiang, X.; Zhang, Q.; Qu, D.; Xu, K.; Song, X. Corrosion behavior of L360N and L415N mild steel in a shale gas gathering environment—Laboratory and on-site studies. J. Nat. Gas Sci. Eng. 2020, 82, 103492. [Google Scholar]
- Wang, Z.; Li, Y.; Jiang, X.; Pan, C. Research Progress on Ancient Bronze Corrosion in Different Environments and Using Different Conservation Techniques: A Review. MRS Adv. 2017, 2, 2033–2041. [Google Scholar] [CrossRef] [Scilit]
- Veleva, L.; Alpuche-Aviles, M.A.; Graves-Brook, M.K.; Wipf, D.O. Comparative cyclic voltammetry and surface analysis of passive films grown on stainless steel 316 in concrete pore model solutions. J. Electroanal. Chem. 2002, 537, 85–93. [Google Scholar] [CrossRef] [Scilit]
- Ahmad, K.; Batool, S.A.; Farooq, M.T.; Minhas, B.; Manzur, J.; Yasir, M.; Avcu, E.; Rehman, M.A.U. Corrosion, surface, and tribological behavior of electrophoretically deposited polyether ether ketone coatings on 316L stainless steel for orthopedic applications. J. Mech. Behav. Biomed. Mater. 2023, 148, 106188. [Google Scholar] [CrossRef] [Scilit]
- Orlikowski, J.; Jazdzewska, A.; Mazur, R.; Darowicki, K. Determination of pitting corrosion stage of stainless steel by galvanody namic impedance spectroscopy. Electrochim. Acta 2017, 253, 403–412. [Google Scholar] [CrossRef] [Scilit]
- Sotoodeh, K. Subsea Valves and Actuators for the Oil and Gas Industry; Gulf Professional Publishing: Houston, TX, USA, 2021. [Google Scholar]
- Cvek, M.; Mrlík, M.; Ilˇcíková, M.; Mosnáˇcek, J.; Münster, L.; Pavlínek, V. Synthesis of silicone elastomers containing silyl-based polymer grafted carbonyl iron particles: An efficient way to improve magnetorheological, damping, and sensing performances. Macromolecules 2017, 50, 2189–2200. [Google Scholar] [CrossRef] [Scilit]
- Cabral-Miramontes, J.; Gaona Tiburcio, C.; García Mata, E.; Esneider Alcála, M.Á.; Maldonado-Bandala, E.; Lara-Banda, M.; Nieves-Mendoza, D.; Olguín-Coca, J.; Zambrano-Robledo, P.; López-León, L.D.; et al. Corrosion Resistance of Aluminum Alloy AA2024 with Hard Anodizing in Sulfuric Acid-Free Solution. Materials 2022, 15, 6401. [Google Scholar] [CrossRef] [Scilit]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2026 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.