Materials, Volume 17, Issue 7

A series of Ti41Zr25Be34-xNix (x = 4, 6, 8, 10 at.%) and Ti41Zr25Be34-xCux (x = 4, 6, 8 at.%) bulk metallic glasses were investigated to examine the influence of Ni and Cu content on the viscosity, thermoplastic formability, and nanoindentation of Ti...

The damping system ensured by the osteochondral (OC) unit is essential to deploy the forces generated within load-bearing joints during locomotion, allowing furthermore low-friction sliding motion between bone segments. The OC unit is a multi-layer s...

Considering recent climate changes, special importance is given to any attempt to depollute and protect the environment. A circular economy seems to be the ideal solution for the valorization of mineral waste, resulting from various industrial branch...

Typically, in the manufacturing of GH4169 superalloy forgings, the multi-process hot forming that consists of pre-deformation, heat treatment and final deformation is required. This study focuses on the microstructural evolution throughout hot workin...

The microstructures and mechanical properties of equiatomic CoCrFeMnNi high-entropy alloys (HEAs) treated with various processing parameters of laser surface heat treatment are studied in this paper. The typical inverse gradient-grained structure, wh...

The aim of this article is to explore the dynamic compaction characteristics of stone mastic asphalt (SMA) and the friction–lubrication effect of internal particles during the superpave gyratory compaction (SGC) process. Firstly, a calculated m...

Constructing three-dimensional (3D) current collectors is an effective strategy to solve the hindrance of the development of lithium metal anodes (LMAs). However, the excessive mass of the metallic scaffold structure leads to a decrease in energy den...

Aluminosilicates, such as montmorillonite, kaolinite, halloysite, and diatomite, have a uniform bidimensional structure, a high surface-to-volume ratio, inherent stiffness, a dual charge distribution, chemical inertness, biocompatibility, abundant ac...

In this paper, La2Ce2O7 powders co-activated by Ho3+ and Yb3+ were synthesized by a high temperature solid-state reaction. Both Ho3+ and Yb3+ substitute the La3+ sites in the La2Ce2O7 lattice, where the Ho3+ concentration is 0.5 at.% and the Yb3+ con...

This paper presents the extraction of zinc ions from waste resulting from the galvanic industry, such as sludge from acid zinc electroplating baths, and their revaluation in mineral fertilizer as zinc–ammonium phosphate. The purpose of this wor...