Skip to Content
MaterialsMaterials
  • Article
  • Open Access

22 July 2024

14 Pages

Experimental Permeability and Porosity Determination of All-Oxide Ceramic Matrix Composite Material

,
,
,
,
,
and
1
Institute of Fluid-Flow Machinery, Polish Academy of Sciences (IMP PAN), Fiszera 14, 80-231 Gdansk, Poland
2
Department of Power Systems and Environmental Protection Facilities, Faculty of Mechanical Engineering and Robotics, AGH University of Krakow (AGH), Adama Mickiewicza 30, 30-059 Krakow, Poland
3
WPX Faserkeramik GmbH, Redcarstr. 44 B, D-53842 Troisdorf, Germany
4
Academic Centre for Materials and Nanotechnology, AGH University of Krakow (AGH), Adama Mickiewicza 30, 30-059 Krakow, Poland

Abstract

This paper presents an investigation into the water permeability of an all-oxide ceramic matrix composite. To determine the parameters and characterize the water permeability of the ceramic composite material, an experimental study was carried out in which a dedicated test rig was constructed and commissioned. A total of five different configurations of composite tubes were tested. They differed in fibre roving strength, winding angle, fibre bundle arrangement during winding, and matrix grain size distribution. To better understand the internal structure of the analysed ceramic matrix composite material, the experimental study used scanning electron microscopy for microstructure and porosity observation. The tested tubes will be used as liners in an oxy-combustion chamber in future studies. The experiments obtained new and interesting results regarding the water permeability of the ceramic matrix composite with different structural parameters. It was also observed that, as with some porous materials, the permeability of ceramic matrix composites decreases with time as more and more liquid is pressed through it.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.