Skip to Content
You are currently on the new version of our website. Access the old version .
MaterialsMaterials
  • Article
  • Open Access

27 June 2024

14 Pages

Aliphatic Polycarbonate-Based Binders for High-Loading Cathodes by Solvent-Free Method Used in High Performance LiFePO4|Li Batteries

,
,
,
,
,
,
,
and
1
School of Chemical Engineering and Technology, Sun Yat-sen University, Guangzhou 510275, China
2
The Key Laboratory of Low-Carbon Chemistry & Energy Conservation of Guangdong Province/State Key Laboratory of Optoelectronic Materials and Technologies, School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China
3
Institute of Chemistry, Henan Academy of Sciences, Zhengzhou 450000, China
4
College of Chemistry, Zhengzhou University, Zhengzhou 450001, China
This article belongs to the Special Issue Advanced Materials for Metal-Based Batteries

Abstract

The binder ratio in a commercial lithium-ion battery is very low, but it is one of the key materials affecting the battery’s performance. In this paper, polycarbonate-based polymers with liner or chain extension structures are proposed as binders. Then, dry LiFePO4 (LFP) electrodes with these binders are prepared using the solvent-free method. Polycarbonate-based polymers have a high tensile strength and a satisfactory bonding strength, and the rich polar carbonate groups provide highly ionic conductivity as binders. The batteries with poly (propylene carbonate)-plus (PPC-P) as binders were shown to have a long cycle life (350 cycles under 1 C, 89% of capacity retention). The preparation of dry electrodes using polycarbonate-based polymers can avoid the use of solvents and shorten the process of preparing electrodes. It can also greatly reduce the manufacturing cost of batteries and effectively use industrial waste gas dioxide oxidation. Most importantly, a battery material with this kind of polycarbonate polymer as a binder is easily recycled by simply heating after the battery is discarded. This paper provides a new idea for the industrialization and development of a novel binder.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.