Dabwan, A.; Anwar, S.; Al-Samhan, A.M.; AlFaify, A.; Nasr, M.M.
Investigations on the Effect of Layers’ Thickness and Orientations in the Machining of Additively Manufactured Stainless Steel 316L. Materials 2021, 14, 1797.
https://doi.org/10.3390/ma14071797
AMA Style
Dabwan A, Anwar S, Al-Samhan AM, AlFaify A, Nasr MM.
Investigations on the Effect of Layers’ Thickness and Orientations in the Machining of Additively Manufactured Stainless Steel 316L. Materials. 2021; 14(7):1797.
https://doi.org/10.3390/ma14071797
Chicago/Turabian Style
Dabwan, Abdulmajeed, Saqib Anwar, Ali M. Al-Samhan, Abdullah AlFaify, and Mustafa M. Nasr.
2021. "Investigations on the Effect of Layers’ Thickness and Orientations in the Machining of Additively Manufactured Stainless Steel 316L" Materials 14, no. 7: 1797.
https://doi.org/10.3390/ma14071797
APA Style
Dabwan, A., Anwar, S., Al-Samhan, A. M., AlFaify, A., & Nasr, M. M.
(2021). Investigations on the Effect of Layers’ Thickness and Orientations in the Machining of Additively Manufactured Stainless Steel 316L. Materials, 14(7), 1797.
https://doi.org/10.3390/ma14071797