Skip to Content
You are currently on the new version of our website. Access the old version .
MaterialsMaterials
  • Article
  • Open Access

20 December 2021

12 Pages

Creep Age Forming of Fiber Metal Laminates: Effects of Process Time and Temperature and Stacking Sequence of Core Material

,
,
,
and
1
Department of Mechanical Engineering, Arak University of Technology, Arak 38181-8411, Iran
2
Center for Mechanical Technology an Automation, Department of Mechanical Engineering, Campus de Santiago, University of Aveiro, 3810-183 Aveiro, Portugal
*
Author to whom correspondence should be addressed.
This article belongs to the Special Issue Sheet/Bulk Metal Forming and Hybrid Components

Abstract

Fiber metal laminates (FMLs) are a type of hybrid materials interlacing composites and metals. In the present work, FMLs with aluminum alloy 6061 as the skin and E-glass fiber-reinforced polypropylene (PP) as the core material are fabricated and formed by the creep age forming (CAF) process. The effects of time and temperature as the process parameters and thickness and stacking sequences of composites layers as the FML parameters are evaluated on the springback of glass-reinforced aluminum laminates (GLARE) FMLs. After the CAF process, the springback of creep age-formed FMLs is calculated. The results show that the FMLs can be successfully formed with the CAF process by considering appropriate time and temperature. In addition, the stacking sequence of composite layers can affect the springback behavior of FMLs significantly.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.